User manual TYAN THUNDER K8WE

[. . . ] Thunder K8WE /// Version 1. 01 S2895 Copyright Copyright © TYAN Computer Corporation, 2004-2005. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Taro and Thunder K8WE are trademarks of TYAN Computer Corporation. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. [. . . ] Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced C800-CBFF: CC00-CFFF: D000-D3FF: D400-D7FF: D800-DBFF: DC00-DFFF: [Available] [Available] [Available] [Available] [Available] [Available] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature C800-CBFF, CC00-CFFF D000-D3FF, D400-D7FF D800-D8FF, DC00-DFFF Option Available Reserved Description Reserves the specified block of upper memory for use by legacy ISA devices. 45 http://www. tyan. com PCI/PNP ISA IRQ Resource Exclusion You can use this screen to select options for the PCI/PNP IRQ Resource Exclusion settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced IRQ3 IRQ4 IRQ5: IRQ7 IRQ9 IRQ10 IRQ11 IRQ15 [Available] [Available] [Available] [Available] [Available] [Available] [Available] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature IRQ3/4/5/7/9/10/11/15 Option Available Reserved Description Reserves the specified IRQ for use by legacy ISA devices. 46 http://www. tyan. com 3. 6. 4 - IDE Configuration Sub-Menu You can use this screen to select options for the IDE Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Large Disk Access Mode: Local Bus IDE adapter: 4IDE Channel 0 Master 4IDE Channel 0 Slave 4IDE Channel 1 Master 4IDE Channel 1 Slave 4IDE Channel 2 Master 4IDE Channel 3 Master [DOS] [Both] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature Large Disk Access Mode Local Bus IDE adapter IDE Channel 0/1 Master/Slave IDE Channel 2/3 Master Option DOS Other Both Disabled Primary Secondary Menu Item Menu Item Description Select the IDE access mode. Enable the integrated local bus IDE adapter. Configure the IDE channel. 47 http://www. tyan. com IDE Channel 1/0 Master/Slave The following screen shows the information of IDE channel 1/0 Master/Slave. PhoenixBIOS Setup Utility Advanced Type: CHS Format Cylinders: Cylinders: Heads: Heads: Sectors: Sectors: Maximum Capacity: Maximum Capacity: LBA Format' Total Sectors: Maximum Capacity: Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: Item Specific Help [ 1] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature Multi-Sector Transfers Option Disabled Enabled Disabled LBA Mode Control Enabled 32 Bit I/O Disabled Enabled Disabled Enabled 48 Transfer Mode Description Specify the number of sectors per block for multiple sector transfer. Enabling LBA causes Logical Block Addressing to be used in place of Cylinders, Heads_Sectors. This setting enables or disables 32 bit IDE data transfers. Select the method for moving data to/from the drive. http://www. tyan. com Disabled Ultra DMA Mode Enabled IDE Channel 2/3 Master Select the Ultra DMA mode used for moving data to/from the drive. The following screen shows the information of IDE Channel 2/3 Master. PhoenixBIOS Setup Utility Advanced Type: LBA Format' Total Sectors: Maximum Capacity: Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values 49 http://www. tyan. com 3. 6. 5 - Floppy Configuration Sub-Menu You can use this screen to select options for the Floppy Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Floppy disk controller: Base I/O address: Legacy Diskette A: [Auto] [Primary] [1. 44/1. 25 MB 3 [Disabled] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature Floppy disk controller Base I/O address Option Auto Disabled Enabled OS Controlled Primary NULL Auto Disabled Enabled Enabled Description Configure using floppy disk controller. Set the base I/O address for the floppy disk controller. Select floppy type Legacy Diskette A 50 http://www. tyan. com 3. 6. 6 - I/O Device Configuration Sub-Menu You can use this screen to select options for the I/O Device Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Serial port A: Base I/O address: Interrupt: Indicates a DMA, interrupt, I/O, or memory resource conflict with another device. [Auto] [3F8] [IRQ 4] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature Serial port A Base I/O address Interrupt Option Auto Disabled Enabled OS Controlled 3F8 2F8 3E8 IRQ4 IRQ3 Description Configure serial port A. Set the base I/O address for serial port A. Set the interrupt for serial port A. 51 http://www. tyan. com 3. 7 - BIOS Memory Menu This menu has options for memory speed & latency. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Memory Cache Ram System Memory: Extended Memory: Memory Cache: Cache System BIOS area: Cache Video BIOS area: Cache Base 0-512k: Cache Base 512k-640k: Cache Extended Memory Area: Cache A000 ­ AFFF: Cache B000 ­ BFFF Cache C800 ­ CBFF: Cache CC00 ­ CFFF: Cache D000 ­ D3FF: Cache D400 ­ D7FF: Cache D800 ­ DBFF: Cache DC00 ­ DFFF: Cache E000 ­ E3FF: Cache E400 ­ E7FF: Cache E800 ­ E8FF: Cache EC00 ­ EFFF: [XXXX KB] [XXXX KB] [Enabled] [Write Back] [Write Back] [Write Back] [Write Back] [Write Back] [Write Back] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Write Back] [Write Protect] [Write Protect] [Write Protect] [Write Protect] Item Specific Help F1: Help ¡ô¡õ: Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡ö ¡÷: Select Screen Enter: Select 4 Sub-Menu F10: Previous Values Feature Memory Cache Cache System BIOS area Option Enabled Disabled Write Back Write Through Write Protect 52 Description Set the state of memory cache. Control caching of system BIOS area. http://www. tyan. com Cache Video BIOS area Cache Base 0-512K Cache Base 512K-640K Cache Extended Memory Area Cache A000-AFFF Cache B000-BFFF Cache C800-CBFF Cache CC00-CFFF Cache D000-D3FF Cache D400-D7FF Cache D800-DBFF Uncached Write Back Write Through Write Back Uncached Write Back Write Through Write Back Uncached Write Back Write Through Write Back Uncached Write Back Write Through Write Back Uncached Disabled USHC Write Through Write Protect Write Back Disabled Write Through Write Protect Write Back Write Back Write Through Write Protect Disabled Write Protect Write Through Disabled Write Back 53 Control caching of video BIOS area. Control caching of 512K base memory. Control caching of 512K640K base memory. Control caching of system memory above one megabyte. Control caching of the memory blocks. Control caching of the memory blocks. Cache DC00-DFFF Control caching of the memory blocks. Cache E000-E3FF Cache E400-E7FF Cache E800-E8FF Cache EC00-EFFF Control caching of the memory blocks. http://www. tyan. com 3. 8 - BIOS Boot Menu This menu has options for the Boot Device Priority. [. . . ] ZCR (Zero Channel RAID): PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 66 http://www. tyan. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]