User manual TYAN THUNDER N3600M S2932-E

[. . . ] Thunder n3600M /// Version 1. 0 S2932-E Copyright Copyright © TYAN Computer Corporation, 2007. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder n3600M are trademarks of TYAN Computer Corporation. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. [. . . ] Enabled: allows option ROMs to trap interrupt 19. Enable/Disable endless loop boot from BBS table. Wait for ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture Enabled Disabled Enabled Disabled Disabled Enabled Enabled Disabled Endless Boot 65 3. 9. 2 Boot Device Priority Use this screen to select options for the Boot Device Priority. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Boot Device Priority 1st Boot Device 2nd Boot Device [xx, xxx-xxxxx:xxx] [xx, xxx-xxxxx:xxx] Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Boot Device Priority 1st Boot Device 2nd Boot Device Option xx, xxx-xxxxx:xxx xx, xxx-xxxxx:xxx Disabled Description Settings for boot priority. These can be customized depending on your preference. 66 3. 9. 3 Removable Drives Use this screen to select options for the Removable Drives. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Removable Drives 1st Drive [1 FLOPPY DRIVE] st ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Removable Drives 1st Drive Option xx, xxx-xxxxx:xxx Disabled Description Specifies the boot sequence from the available devices. 67 3. 9. 4 Network Drives Use this screen to select options for the Network Drives. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Network Drives 1st Drive 2nd Drive [Netwrok: NVIDIA Boo] [Network:2-NVIDIA B] ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Network Drives 1st /2nd Drive Option xx, xxx-xxxxx:xxx Disabled Description Specifies the boot sequence from the available devices. 68 3. 10 Security Menu The system can be configured so that all users must enter a password every time the system boots or when BIOS Setup is entered, using either the Supervisor password or User password. The Supervisor and User passwords activate two different levels of password security. If you select password support, you are prompted for a one to six character password. The password does not appear on the screen when typed. If you forget it, you must clear CMOS and reconfigure. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Boot Sector Virus Protection [Disabled] Install or change the password. ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Security Settings Supervisor Password: Option Not Installed Installed Not Installed Installed __ __ Disabled Description If the password has been set, Installed displays. If no password is set, Not Installed displays. If the password has been set, Installed displays. If no password is set, Not Installed displays. Selects this option to change or install Supervisor Password. Selects this option to change or install User Password. When it is set to [Enabled], BIOS will issue a virus warning message and beep if a write to the boot sector or the partition table of the HDD is attempted. User Password: Change Supervisor Password Change User Password Boot Sector Virus Protection Enabled 69 3. 11 Chipset Menu This menu allows the user to customize functions of the AMD Chipsets. [. . . ] The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 92 Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, you can bring your system to them to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]