User manual TYAN THUNDER N6650EX S4992

[. . . ] S4992 /// Version 1. 0 S4992 Copyright Copyright © MiTAC International Corporation, 2008. No part of this manual may be reproduced or translated without prior written consent from MiTAC International Corporation. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN®, is trademarks of MiTAC International Corporation. AMD® , Opteron™, and combinations thereof are trademarks of AMD Corporation. [. . . ] During this step, please make sure power supply will not be interrupted. Otherwise, KVM-over-IP Sever Management will become unusable. 77 http://www. TYAN. com Thirdly, after the firmware has been stored, KVM-over-IP Sever Management will reset automatically. After about one minute you will be redirected to the Login page and requested to login once again. 78 http://www. TYAN. com 3. 5. 7. 4 Unit Reset This section allows you to reset specific parts of the device. This involves the both keyboard and mouse, the video engine and the KVM-over-IP Sever Management itself. Resetting the card itself is mainly needed to activate a newly updated firmware. It will close all current connections to the administration console and to the Remote Console. The whole process will take about one minute. video engine) will take some seconds only and does not result in closing connections. Only administrator users are allowed to do reset. 79 http://www. TYAN. com NOTE: 1. Driver and Software Support As KVM-over-IP Sever Management is OS independent, normally you don’t need load any driver at all. But in some cases, if you want to use some inband utility or application, generic IPMI driver is needed. Open IPMI driver on Linux KVM-over-IP Sever Management can use the Open IPMI driver in Linux Kernel. “modprobe ipmi_devintf” “modprobe ipmi_si” If you use old version Linux Kernel, module “ipmi_si” is repaced by “ipmi_kcs” To load driver correctly, motherboard DMI table IPMI entry should be right. The correct value is base address 0xCA2, I/O mapping and byte spacing. 80 http://www. TYAN. com Windows IPMI Driver KVM-over-IP Sever Management also support Intel reference driver, you can get it on http://www. intel. com/design/servers/ipmi/tools. htm. From Windows Server 2003 R2, Microsoft also provide in box IPMI driver. IPMITool and other IPMI software Support KVM-over-IP Sever Management support open source software IPMI Tool, you can also use other one like Open IPMI, IPMI Util. KVM-over-IP Sever Management Web Pages No connection can be established to KVM-over-IP Sever Management. Is KVM-over-IP Sever Management attached to a power supply?Verify your network configuration (IP address, router). You may send a "ping" request to KVM-over-IP Sever Management to find out whether KVM-over-IP Sever Management is reachable via network. KVM-over-IP Sever Management web pages are not displayed correctly. Check your browser’s cache settings. [. . . ] TYAN also ranks high for its commitment to fast and friendly customer support through email. By offering plenty of options for users, TYAN serves multiple market segments with the industry's most competitive services to support them. "TYAN's tech support is some of the most impressive we've seen, with great response time and exceptional organization in general" Anandtech. com Help Resources: 1. See the beep codes section of this manual. [. . . ]