User manual TYAN TIGER K8WE

[. . . ] Tiger K8WE /// Version 1. 02 S2877 Copyright Copyright © TYAN Computer Corporation, 2005-2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Taro and Tiger K8WE are trademarks of TYAN Computer Corporation. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. [. . . ] Enable the integrated local bus IDE adapter. Configure the IDE channel. Primary Master/Slave Secondary Master/Slave Primary Master/Slave, Secondary Master/Slave The following screen shows the information of IDE device. PhoenixBIOS Setup Utility Advanced Item Specific Help Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Disabled] [Standard] [Disabled] F1: Help : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Multi-Sector Transfers Option Disabled Enabled 51 Description Specify the number of sectors per block for multiple sector transfer. http://www. tyan. com Disabled LBA Mode Control Enabled 32 Bit I/O Disabled Enabled Standard Fast PIO 1 Disabled Ultra DMA Mode Enabled Transfer Mode Enabling LBA causes Logical Block Addressing to be used in place of Cylinders, Heads_Sectors. This setting enables or disables 32 bit IDE data transfers. Select the method for moving data to/from the drive. Select the Ultra DMA mode used for moving data to/from the drive. 3. 6. 5 - Floppy Configuration Sub-Menu You can use this screen to select options for the Floppy Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Legacy Diskette A: Legacy Diskette B: Indicates a DMA, interrupt, I/O, or memory resource conflict with another device. [1. 44/1. 25MB 3 1/2"] [Disabled] Item Specific Help F1: Help : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Legacy Diskette A/B Option Disabled Enabled Description Select floppy type 52 http://www. tyan. com 3. 6. 6 - I/O Device Configuration Sub-Menu You can use this screen to select options for the I/O Device Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Serial port A: Serial port B: Mode: Parallel port: Mode: Floppy disk controller: Base I/O address [Auto] [Auto] [Normal] [Auto] [ECP] [Enabled] [Primary] Item Specific Help F1: Help : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Serial port A Serial port B Mode Parallel port Mode Floppy disk controller Base I/O address Option Disabled Enabled Disabled Enabled Normal IR Disabled Enabled Output only Bi-directional Disabled Enabled Primary Secondary Description Configure serial port A using options. Set the mode for Serial port B using options. Set the mode for parallel port using options. Configure Floppy disk controller using options. Set the base I/O address for parallel port. 53 http://www. tyan. com 3. 6. 7- Hardware Monitor Sub-Menu You can use this screen to hardware monitor information. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced CPUx Temperature CPUx Fan Speed System Fan Speed CPUx VDD Voltage +12V +5v +3. 3V VLDT xxC xxxxRPM xxxxRPM x. x V x. xV x. xV x. xV x. xV Item Specific Help F1: Help : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit : Select Screen Enter: Select Sub-Menu F10: Previous Values 3. 6. 8 ­ Console Redirection Sub-Menu You can use this screen to select options for the Console Redirection settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Com Port Address Baud Rate Console Type Flow Control Console connection Continue C. R. after POST [Disabled] [19. 2K] [VT100] [CTR/RTS] [Direct] [off] Item Specific Help F1: Help : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit : Select Screen Enter: Select Sub-Menu F10: Previous Values 54 http://www. tyan. com Feature Com Port Address Baud Rate Console Type Flow Control Option Disabled On-board COMA On-board COMB 19200 38400 57600 115200 VT100 VT100, 8bit PC-ANSI, 7bit PC ANSI VT100+ VT-UTF8 None XON/XOFF Direct Description Select the Com Port address. Enable the specified baud rate. Enable the specified console type. Enable flow control. Indicate whether the console is connected directly to the system or a modem is used to connect. Enable Console Redirection after OS has loaded. Console connection Via modem Continue C. R. after POST Off On 55 http://www. tyan. com 3. 6. 9­ Watchdog Timer Option Sub-Menu You can use this screen to select options for the Watchdog settings. [. . . ] ZCR (Zero Channel RAID): PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 73 http://www. tyan. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]