User manual TYAN TOMCAT I845GL

[. . . ] Trinity i845GL /// Revision 1. 00 S2098 Copyright © TYAN Computer Corporation, 2002. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Trinity i845GL S2098 are trademarks of TYAN Computer Corporation. [. . . ] Changes UDMA (Ultra Direct Memory Access) interface mode for HDD. Toggles the use of a USB keyboard under DOS. Choose to detect onboard AC97 Audio by BIOS. Enables or disables LAN 1 (10/100Mbit) Enables or disables LAN 2 (Optional 10/100Mbit) Selects the primary graphics card. 27 http://www. TYAN. com (Integrated Peripherals Continued) Enabled IDE HDD Block Mode Disabled Enabled Onboard FDC Controller Disabled Disable, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto Leave this setting as it is. Leave this setting as it is. Onboard Serial Port 1 Sets the address for the onboard Serial Port . Onboard Serial Port 2 UART2 Mode Select Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA Disable, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto Normal IRDA, ASKIR, SCR Disable 378/IRQ7 278/IRQ5 3BC/IRQ7 SPP, EPP, ECP, ECP+EPP 1 3 Sets the address for the onboard Serial Port 2. Selects the device on which to assign UART2. Sets the address of the onboard parallel port. Sets the operation mode of the parallel port. Configures the parallel port DMA channel for the selected ECP mode. 28 http://www. TYAN. com 3. 6 ­ Power Management Setup Options related to power management can be altered through the following: ACPI function ACPI Suspend Type Power Management Enabled Disabled S1 (POS) User Define Maximum Saving Minimum Saving V/H SYNC+Blank Blank DPMS No Yes Stop Grant Power On Suspend 3 Disabled 1/2/4/8/12/20/3040/60 Min Disabled 1, 5, 10, 20, 30, 45, 60 minutes Instant-Off 4-seconds Off On Disabled Enabled Disabled Enabled Toggles advanced power and configuration done by OS. Defines the type of power saving features the system should follow. Defines the method used to power off graphics. Defines the suspend type for Stop Grant or power on suspend. Set the time period before the system goes into suspend mode. Defines the action of the power button when pressed. Defines whether the system will remain off if power fails or turn on when power is restored. Defines whether the system can be powered on by a PCI Card. Defines whether the system will wake up if the modem is dialed into. Set for default. Video Off Method Video Off In Suspend Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Soft-Off by PWRBTN PWRON After PWR-Fail Wake Up by PCI Card Power On by Ring or Wake Up on LAN 29 http://www. TYAN. com (Power Management Setup continued) Resume by Alarm Primary/Secondary IDE 0&1 FDD, COM, LPT Port PCI, PIRQ [A-D] # Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Defines the time/date when the system will wake up. Enables or Disables monitoring Primary IDE 0/1 for power saving. Enables or Disable of monitoring FDD, COM, LPT for power saving. Enables or Disables monitoring PCI PIRQ [A-D] # IRQ Active. 30 http://www. TYAN. com 3. 7 ­ PnP/PCI Configuration Options related to all the configurations of Pnp/PCI resources. Rest Configuration data Resources Controller PCI/VGA Palette Snoop Enabled Disabled Auto (ESCD) Manual Enabled Disabled Leave as Default. Defines whether system resources are controlled by BIOS or by user. Leave as Default. 31 http://www. TYAN. com 3. 8 ­ PC Health Status This menu is related to detecting system temperature, voltage, fan, and speed. Shutdown Temperature 60° 65° 70° 75° C / 140° C / 149° C / 158° C / 167° F F F F To shut down the system when the temperature reaches a certain degree. The onboard hardware monitoring ASIC automatically detects the system, motherboard, and CPU temperatures. It detects the CPU and chassis fan speeds in RPM. [. . . ] VGA (Video Graphics Array): the PC video display standard V-SYNC: controls the vertical scanning properties of the monitor. ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding into the board and locking it into place. 39 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. [. . . ]