User manual TYAN TOMCAT K8S

[. . . ] Tomcat K8S /// Revision 1. 01 S2850 Copyright © TYAN Computer Corporation, 2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat K8S S2850 are trademarks of TYAN Computer Corporation. [. . . ] Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit USB Configuration USB Devices Enabled : Legacy USB Support USB Beep Message [Auto] [Disabled] Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit Feature USB Devices Enabled Option Description USB Devices detected Legacy USB Support Auto Disabled Enabled Floppy Hard Disk Disabled Enabled Enables support for legacy USB devices such as keyboards, mice, & bootable USB devices Enables beep during USB Device Enumeration USB Beep Message 38 http://www. TYAN. com 3. 04. 8 Onboard Device Sub-Menu You can use this screen to view Device & PCI Slot Configuration Menu. This menu allows the user to enable or disable integrated devices, option ROM, and PCI cards added. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit Onboard Devices Configuration Onboard ATI Video Onboard LAN1 Onboard LAN2 Onboard Serial ATA Onboard Devices Optrom Configuration Onboard LAN 1 Option Rom Onboard LAN 2 Option Rom Serial ATA Option Rom Feature Option Enabled Disabled Enabled Disabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/- Change Field Tab Select Field F1 Help F10 Save and Exit ESC Exit Description Allows user to enable or disable onboard ATI video, Serial ATA controller, and Onboard LAN individually Allows user to enable or disable onboard ATI video, Serial ATA controller, and Onboard LAN Option Rom individually Onboard Devices Configuration Onboard ATI Video, LAN1, LAN2, & Serial ATA Onboard LAN1, LAN2, & Serial ATA Option Rom 3. 04. 9 Watchdog Timer Sub-Menu You can use this screen to view Watchdog Timer Configuration Menu. This menu allows the user to enable or disable watchdog timer. Use the up and down arrow ( / ) keys to select a value. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit Watchdog Timer Configuration Watchdog Timer Timer-Out Value(minutes): Enabled 2 Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/- Change Field Tab Select Field F1 Help F10 Save and Exit ESC Exit 39 http://www. TYAN. com Feature Option Description Allows user to enable or disable Watchdog timer Watchdog Timer Configuration Watchdog Timer Disabled Enabled 2 4 Timer-Out Value(minutes) 6 8 10 Allows user to select Watchdog timer 3. 05 ­ BIOS PCI/PnP Menu You can use this screen to view PnP (Plug & Play) BIOS Configuration Menu. This menu allows the user to configure how the BIOS assigns resources & resolves conflicts. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit PCI/PnP Setting Plug & Play OS PCI Latency Timer Allocate IRQ to PCI VGA Palette Snooping PCI IDE BusMaster IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 DMA Channel_0 DMA Channel_1 DMA Channel_3 DMA Channel_5 DMA Channel_6 DMA Channel_7 Reserved Memory Size [No] [64] [Yes] [Disabled] [Disabled] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Disabled] Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit 40 http://www. TYAN. com Feature PCI PnP Configuration Option Yes Description The Yes setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the system is running Plug and Play aware operating systems. Set No for operating systems that do not meet the Plug and Play specifications. It allows the BIOS to configure all the devices in the system. [. . . ] ZCR (Zero Channel RAID): PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 57 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]