User manual ULEAD DVD DISCRECORDER 2.3

[. . . ] Macromedia, Flash and Macromedia Flash are trademarks or registered trademarks of Macromedia, Inc. in the United States and internationally. Avery is a trademark of Avery Dennison Corporation. Manufactured under license from Dolby Laboratories. [. . . ] 4 Edit and info Use these buttons to remove, join, or separate programs and entry points, or view program properties. 8 ULEAD DVD DISCRECORDER USER GUIDE 5 Settings and options Click to open a menu where you can customize the settings for playing back video, or viewing information about DVD DiscRecorder. 6 Project settings Click to view information about the project and customize its output settings. 7 Print disc label Click to create disc labels or covers. 8 Disc space usage Displays the total file size and video length to be used in the disc. 9 Program video clip list Shows the selected or all program thumbnails. 10 Navigation controls Use these buttons to preview your video clips. Capturing videos DVD DiscRecorder lets you capture videos from digital and analog sources. To capture videos: 1. Select the device to capture from Source (and TV channel if capturing from TV tuner. ) 3. If capturing from a DV device, use the navigation controls to locate the starting point of the video to capture. Repeat steps 2 to 6 as needed to capture more videos. Click OK. Adding video files You can add video files of different formats such as AVI, MPEG, WMV, and others to your movie. To add a video file to your project: 1. Use [Ctrl] or [Shift] to select ULEAD DVD DISCRECORDER USER GUIDE 9 Adding and editing slideshows Aside from video files, DVD DiscRecorder lets you add photo slideshows to your video projects. Click to open the Multi-trim Video dialog box. Drag the Jog Bar to locate the start of the segment to retain/delete, and then click Mark-in or press [F3]. Drag the Jog Bar to locate the end of the segment to retain/delete, and then click Mark-out or press [F4]. The extracted segment will be added to the Program video clip list. To select more segments, repeat steps 3 and 4. To remove any extracted segment from the list, select it in the Program video clip list and click Remove selected clips . To preview all extracted clips, click Play. Click OK. . Tips: · · To move the Jog Bar at a fixed interval, use Quick search interval. Set the time interval at Click Invert Selection to select or deselect selected video segments. ULEAD DVD DISCRECORDER USER GUIDE 11 Note: On the Program tab, applying Multi-trim Video will replace the original program with the trimmed video (program). Protecting programs To ensure that video clips (programs) will not be changed or removed, you can click the lock icon next to the Program list to switch between protected unprotected and modes. When a program is protected, only playback is allowed. Playlist With playlists, you can watch specific video sections in a desired playback sequence. This is done by creating a series of video scenarios (entry points) retrieved from DVD-VR program video clips. [. . . ] When this task is selected, DVD DiscRecorder will initially check both your burner and disc to ensure that there are no problems with your output device and media. To capture videos directly onto a disc: Make sure your video source is switched on and properly connected to your computer. Then click Straight Capture to Disc and click Next. Select the device to capture from Source. Select a capture mode (for example, select fixed duration, marked duration, or full DV tape if capturing from DV camcorder) and TV channel (if capturing from a TV tuner). [. . . ]