User manual UNIDEN BTSC1500

[. . . ] BTSC1500 Bluetooth® Travel Kit User's Guide Also in this package: Questions?Get help on the web at www. uniden. com or call our Customer Service line at 800-292-2294. Visor clip (attached) DC (car) power adapter Getting to Know the Travel Kit Front Microphone Display Rear Speaker Multi-function button Volume Up button Volume Down button Visor clip Power connector Reading the Display Icons Icon Hello Name What it means Signal strength Shows the relative strength of the Bluetooth signal (appears separately for each connection). Text to speech Bluetooth Call activation Text to speech mode is on. The travel kit is currently paired to a Bluetooth device. [. . . ] In addition, the travel kit uses text-to-speech to announce the caller's phone number. To turn text-to-speech off (and back on), press Volume Up & Volume Down at the same time. Call Waiting When another call comes in while your on the phone, the travel kit sounds a tone and displays Caller ID information for the waiting call. To put your current call on hold and switch to the waiting call, press and hold Volume Up until you hear long beeps (about seconds). When you release the button, you'll be connected to the waiting call. When you want to switch back to the current call, press and hold Volume Up again to switch back to the current call. To hang up your current call and switch to the waiting call, press and hold Volume Down until you hear long beeps (about seconds). When you release the button, you'll be connected to the waiting call. To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile. 8 Using the Travel Kit With Two Phones You can connect your travel kit to two Bluetooth devices and use them simultaneously. Just pair the travel kit to the first phone following the instructions on page . When the first phone is successfully paired, pair the travel kit to the second phone. This feature may not be compatible with certain mobile phones. Using Both Phones The travel kit stays connected to both phones until a call comes in. If you answer the call, the travel kit disconnects from the other phone for the duration of the call. When you hang up, the travel kit automatically reconnects to the other phone. Only one phone at a time can be on an active call. The travel kit plays a different ring tone for each phone so you know which one is ringing. To answer the incoming call, press Multi-function as usual. All the button functions remain the same for the first phone (the one you paired first). To use last number redial on the second phone, press and hold Volume Down until you hear a beep (about seconds). To activate voice dialing on the second phone, press and hold Volume Up until you hear a beep (about seconds). Troubleshooting and Maintenance If you have problems with the travel kit, see the suggestions in the table below. If these don't help, contact customer support (see the front cover for contact information). The travel kit won't turn - Charging the battery completely. [. . . ] Privacy of communications may not be ensured when using this product. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. [. . . ]