User manual UNIDEN DCX100

[. . . ] This manual describes how to set up your new accessory handset; for more detailed instructions on operating your new handset, please refer to the manual supplied with your base. Uniden® is a registered trademark of Uniden America Corporation. [1] Terminology Used in this Manual Base Charger Accessory Handset Standby Talk The main part of the phone that connects to your phone line and lets you make and receive calls. A cradle that charges an accessory handset. It connects to power but not to a phone line. A handset that works with an expandable phone base. [. . . ] You are now in `registration mode'. If the base already has the maximum number of handsets (6) registered to it, you will need to de-register one of the existing handsets before you can register the new handset. See the section on the next page for de-registering handsets. [4] On the handset you want to register: Enter the base PIN code. You will hear a confirmation tone when registration is complete. When in standby mode, the new handset number will be displayed. The handset will automatically be allocated with the next available handset number. If registration is unsuccessful, the display will show Not Registered and you will need to follow the registration procedure again. De-register a Handset or a Base If you have more than one handset registered to your base or more than one base registered to your handset(s), you can deregister both the handset from the base or the base from the handset. Before deregistering, make sure all handsets and the base are in standby mode. 1 2 3 4 5 6 Press Press Press Press or or or to access the main menu. Settings is displayed and press to display Deregister and press to select Handset or Base and press . . Press or to display the handset or base you want to de-register and press . Press or to select Yes and press If the handset has been registered to the base successfully, you will hear a confirmation tone. Press to exit and return to standby. 7 · You can register a handset to up to 4 bases, e. g. one at work and one at home, and switch between them. [5] Using Your Accessory Handset Now that your new handset is registered, it can perform all the same functions as the handsets originally included with your phone. With your new handset, you can · Transfer calls between handsets · Hold conference calls · Access the integrated answering device or voice mail using a handset See the owner's manual that came with your main base for complete instructions on operating your new expanded phone. Battery Information Low battery alert If the symbol is displayed on the handset, Charge Battery appears and you hear the low battery tone, you will need to recharge your handset. We recommend that you place the handset back on the charger in-between use to ensure that it is always fully charged. Cleaning the battery charging contacts To maintain a good charge, clean the charging contacts on the handset once a month. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle. Caution: Do not use paint thinner, benzene, alcohol, or other chemical products. [. . . ] Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). [. . . ]