User manual UNIDEN DECT3380

[. . . ] DECT3380 Series User's Guide What's in the box? DECT3380 base with answering system and cordless handset You will also find: DCX330 Accessory handset and charger Not pictured: - Rechargeable battery (BT-1018) - Battery cover - Charger AC adapter (PS-0035) If you purchased model number: DECT3380 DECT3380-2 DECT3380-3 DECT3380-4 DECT3380-5 DECT3380-6 You should have: None 1 of each 2 of each 3 of each 4 of each 5 of each Battery cover If You. . . If any items are missing or damaged, contact our Customer Care Line immediately. Get answers 24/7 at our website: www. uniden. com. Not pictured: - Rechargeable battery (BT-1018) - AC adapter (PS-0034) - Telephone cord Contact Uniden's. . . Customer Care Line* Phone Number 817-858-2929 or 800-297-1023 800-554-3988 800-874-9314 (voice or TTY) have a question or problem * During regular business hours, Central Standard Time; see our website for detailed business hours. © 2010 Uniden America Corp. Worth, Texas need a replacement part or an Parts Department* accessory need special assistance due to Accessibility Help Line a disability Printed in Vietnam UNZZ01122BZ(0) MULTIRANGETM Charger and Accessory Handset If the model number ends in R, your package contains a DRX332 handset with a MULTIRANGETM charger in place of one DCX330. The AC adapter for the DRX332 is PS-0033. [. . . ] Select one of the following: Answering System Options (Ans. Setup) Security Code 22 Ring Time Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see page 26). Set the number of rings (2, 4, or 6) before the answering system answers the phone. Choose Toll Saver to have the system answer after 2 rings if you have new messages or after 4 rings if you don't. Set the amount of time callers have to leave a message, either 1 minute or 4 minutes. Choose Record Time Announce Only if you don't want the system to let callers to leave a message. Have the system beep every 15 seconds when you have a new message; the beeping stops when you Message Alert listen to all your new messages. (To mute the alert without listening to your messages, press any key on the base. ) Ans. Language Change the language of the system's voice prompts. Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see page Call Screen 25). On/off system on or off from the base, just press on/off. ) You can access your system from a handset whenever the phone is in standby. Accessing the Answering System Press MESSAGES to start remote operation mode. 5:Stop [ / /select] Use PHONEBOOK/ LEFT to go to the previous option: Press MENU/SELECT to choose the displayed option. Use CALLER ID/ RIGHT to go to the next option: During remote operation, the phone beeps to let you know it's waiting for your next command. 4:Delete 3:Skip 2:Play 1:Repeat 6:SelectGreeting 8:RecNewGreeting Press END to exit remote operation mode. 23 Your greeting can be between 2 seconds and 30 seconds long. If you don't record an outgoing message, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone. Personalizing Your Greeting You can press the number key next to the commands instead of scrolling through them. If you don't press any keys for 30 seconds, the phone returns to standby. Only one handset can access the system at a time, and you can't access the system while another handset is on a call. Record your personal outgoing message or greeting Switch between the two greetings 1. Wait until the system finishes its announcements, or press 5 (Stop) to skip them. Wait for the system to say "Record greeting, " then begin speaking. When you're finished, press 8 (RecNewGreeting) to recording. The system plays back your new greeting. Wait until the system finishes its announcements, or press 5 (Stop) to skip them. Press 6 (SelectGreeting) to play back the current greeting. Press 6 (SelectGreeting) again to switch greetings. Switch to your personal greeting following the steps above. [. . . ] The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. accessory supplied with this product. (All necessary accessories are included in the package; any additional or optional accessories are not required for compliance with the guidelines. ) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines. Radio equipment The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. [. . . ]