User manual UNIDEN DECT4066

[. . . ] DECT4066 Series User's Guide What's in the box? DECT4066 two-line base with cordless handset Desk stand/wall mount bracket Rechargeable battery pack (BT-1018) Battery cover Telephone cord with two-line support Belt clip Base AC adapter (PS-0034) You might also find: If you purchased You should model number:* have: DECT4066 None DECT4066-2 1 of each DECT4066-3 2 of each 3 of each DECT4066-4 DECT4066-5 4 of each DECT4066-6 5 of each * If the model number ends with an R, your package DCX400 accessory handset and charger For a DCX400: - Battery cover - Belt clip - Charger AC adapter (PS-0035) - Rechargeable battery pack (BT-1018) contains a DRX402 accessory handset with MULTIRANGETM charger in place of one DCX400. Please refer to the DRX402 user's guide for contents and instructions. If any items are missing or damaged, contact our Customer Care Line immediately. Get answers 24/7 at our website: www. uniden. com. have a question or problem Contact Uniden's. . . [. . . ] On the dial pad, press and hold the number assigned to the phonebook entry you want. The phone opens the phonebook and goes directly to that entry. Follow the instructions for dialing an entry above. Dial either number for an entry Use a speed dial number to open a phonebook entry On the handset, press END; on the base, press MUTE/ Close the phonebook EXIT. (If you open the phonebook during a call, press BACK to back out without hanging up. ) Setting Up Your Phonebook Creating a new entry Open the phonebook with the phone in standby, and press NEW . The phone walks you through the phonebook entry items in the order listed below. On each screen, press OK when you're finished editing the item or if you want to skip the item: Edit Name Enter the name (up to 16 characters) you want to use for this entry. 26 Edit Number1 Enter the primary number (up to 32 digits) for this entry exactly the way you would dial it. - If you need the phone to wait before sending the next set of digits, press REDIAL/PAUSE to enter a two-second pause. - If two seconds isn't long enough, you can enter as many pauses as you want. - Each pause counts as one digit (you'll see a P in the number). Enter the secondary number for this entry just like you did the primary number. (Handset only) Choose the ring tone you want the handset to use when this person calls. As you highlight each ring tone, the handset sounds a sample of that tone. Select the speed dial number (SPD0 through SPD9) you want to assign to this entry. - The speed dial numbers correspond to the numbers (0 through 9) on the twelve key dial pad. - Each speed dial number can be assigned to only one entry. - If the speed dial number is already assigned, the phone shows the name of the entry assigned to the number. If you want to change it, select the number, and the phone overwrites the existing assignment. Edit Number2 Personal Ring selection Speed Dial Editing an existing entry 1. With the station in standby, open the phonebook and find the entry you want. Press OPTIONS , then Edit Name choose Edit. Highlight the individual 987-555-1234 item you want to Edit Number2 123-555-9876 change and press Personal ring (handset Clatter SELECT . The phone only) Edit Speed Dial 4 goes to the edit screen Speed for that item. Edit the item as described under "Creating a new entry" (above), and press OK . [. . . ] Operation is subject to the following two conditions: (1) this device may not cause interference, & (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone". Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original retail sale. [. . . ]