User manual UNIDEN DX8200

[. . . ] Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. [. . . ] If desired, press chan/pause on the Handset to enter delays between numbers. Follow steps 3 through 5 in "Entering Handset Memory Numbers" on page 25. h 4. 5. Erasing a Stored Number You can erase stored numbers from the Base Unit and the Handset memory. Enter the memory location number ( 0-9 ) you want to clear. You will hear a long beep confirming the number is erased. Erasing Handset Memory Numbers 1. Enter the memory location number ( 0-9 ) you want to clear. You will hear a long beep confirming the number is erased. 27 Using Your DX8200 h Refer to the foldout located in the front of this Operating Guide for key positions. Answering a Call from the Base Unit For example, to answer a call on line 1: 1. The Base Unit rings, and the corresponding red line 1 LED on the base flashes. 2. 3. Press the line 1 button or press the speaker button. If both lines are ringing, you can press speaker to answer the first line used. When you finish the call, press speaker to hang up. h 4. Answering a Call from the Handset For example, to answer a call on line 1: 1. The Handset rings and the talk LED flashes. If the Handset is not in the Base Unit, press the line 1 button, or talk to answer the call. --OR-- If the Handset is in the Base Unit, the AutoTalk feature allows you to answer the call by simply picking up the Handset and beginning your conversation. h If both lines are ringing, press talk or lift the Handset from the Base Unit to answer the first line used. 28 3. When you finish the call, place the Handset back on the Base Unit. AutoStandby automatically hangs up the phone. There is no need to press talk to hang up. --OR-- If the Handset is away from the Base Unit, press talk to hang up the phone. Making a Call from the Base Unit 1. When speaker is pressed, the DX8200 automatically finds the first available line. When the line 1 or line 2 LED is on and you hear a dial tone, dial the number you are calling by pressing the numbers on the keypad or using one of the memory features. See "Dialing Stored Numbers" on page 36. When you finish the call, press speaker to hang up. h 2. 3. Making a Call from the Handset For example, to make a call using line 1: 1. When talk is pressed, the DX8200 automatically finds the first available line. [. . . ] E. Speaker speaker Line 1 line 1 Line 2 line 2 Star/Tone * /tone Numeric Keypad F. J. Pound Key # Flash/Redial flash/rdl Memory mem Pause pause Hold hold K. O. Conference conf Page/Intercom page/int'com Speaker Volume Ring Volume Pulse - Tone P. R. DC Input Line 2 Jack Line 1/2 Jack Controls and Functions Handset 1. [. . . ]