User manual UNIDEN DXAI4288-2

[. . . ] DXAI 4288-2 Contents Welcome/Features Controls and Functions Terms Used in this Manual Accessibility Installing the Phone A. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets D. Mount the Main Base on a Wall Installing the Beltclip Headset Installation 2 3 5 6 7 7 8 9 10 11 12 Selecting a Different Channel Find Handsets Using Call Waiting 22 22 23 Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory 24 24 27 28 Caller ID and CIDCW (Caller ID on Call Waiting) Viewing the Caller ID Message List Deleting Information from the Caller ID List Making a Call from the Caller ID List Caller ID on Call Waiting (CIDCW) 29 30 31 32 32 Register Handsets to the Main Base before Using! [. . . ] You hear a confirmation tone, and then your greeting plays back for you. Choosing between the two outgoing messages With the phone in standby mode, press the greeting key. Then press the greeting key to play the current outgoing message. While the outgoing message is playing, press the greeting key again to switch between the prerecorded greeting and the personal greeting. After the message finishes playing, a confirmation tone is heard. To delete the personal greeting, press the (delete) key during the announcement and the system announces "Greeting has been deleted. " [ 41] S E T T IN G U P YO U R A NS W ER I NG S Y S T E M ww w . c o m S ET TI NG UP Y OUR AN SW ERI NG S YST EM Setting the Main Base Ringer Volume The base has three ringer volume settings: high, low, and off. You can change the ringer volume while in standby mode or while an incoming call is ringing. You hear the ringer at the current volume level ([ ] high, [ ] low, [ ] off) (if you set the main base ringer volume to off, "Ringer off " is announced) and it is displayed on the main base. 2) Press the ringer key repeatedly until the desired ringer option appears. 3) The system displays the new ringer volume. note Even when the main base ringer is turned off, the handset will still ring. Temporarily Mute the Main Base Ringer and Call Screen Press the (play/stop) key to temporarily mute the incoming ring and call screen. The ringer will sound with the next incoming call. To turn the ringer back on for this call, press the ringer key. To hear the answering machine and screen this call, press the or /volume/select key. Adjusting the Speaker Volume Level You can adjust the volume of the main base speaker by pressing the or /volume/select key on the main base. Press the /volume/select key for louder or the /volume/select key for softer while the main base speaker is being used except for menu mode. The numbers [ ] -[ ] are displayed on the main base indicating the volume levels. [ ] being the softest and [ ] being the loudest. www. uniden. com SE T T IN G UP Y O U R AN SWE R IN G SY ST E M [ 42] S ET TI NG UP Y OUR AN SW ERI NG S YST EM Turning the Answering System On/Off To turn the answering system on, press the (answer on/off) key. The system will announce "Answering system is on. " The current greeting message will be played, and you hear a confirmation tone. The message counter displays the number of messages stored in memory. If the display flashes, there are new messages waiting for you. To turn the answering system off, press the (answer on/off) key again. After the announcement "Answering system is off, " the message counter display will no longer be illuminated. [ 43] S E T T IN G U P YO U R A NS W ER I NG S Y S T E M ww w . c o m Using Your Answering System The message counter displays the number of messages stored in memory. If the display flashes, new messages are waiting for you. [. . . ] c o m Remote Operation Card CUT CUT REMOTE OPERATION CARD Remote access away from home 1. Call your phone number from a touch-tone phone. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts. [. . . ]