User manual UNIDEN DXAI8580

[. . . ] UNIDEN CORDLESS TELEPHONES DXAI8580 Series At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. Our customer care specialists are here to help you!uniden. com or call our Customer Hotline at 1-800-297-1023 during regular business hours. * To order headsets, additional handsets, replacement batteries or other accessories, visit our website at www. uniden. com or call 1-800-554-3988 during regular business hours. * Uniden provides a customer service hotline for accessibility questions. [. . . ] Press [menu/clock] to go to the next item. If you are already at the last menu item, the base beeps and returns to standby. · When you hear the menu item you want, use [vol/select/ ] and [vol/select/ ] to scroll through the options for that menu item. To quickly scroll through the options when setting the time or security code, press and hold [vol/select/ ] or [vol/select/ ]. · Press [set] to select the current option. · If you wait longer than five seconds before pressing a key, the system returns to standby. When you're setting the time, you have two minutes before the system exits the menu. · Press [ ] to exit the menu and return to standby. · If you receive an incoming call or if a handset presses the [TALK/flash], the system automatically exits the menu. The flow chart below shows the answering system menu items and the available options: Press Time The system announces "Time" use to: Press 1. 4. Select the day (1 - 7 ); then press SET. Select the hour (1 - 12 ); then press SET. Select the minutes (00 - 59 ); then press SET. Select am/pm (A or P ). to save the setting. Set a security code (01 - 99 ) so you can access the answering system when you're away from home. The default security code is 80. Security code Press The system announces "Security code" use to: Press use to: Press to save the setting. Set the number of rings the system will wait before it answers. Select 2, 4 , or 6 rings; select toll saver ( ) to have the system answer in 2 rings if you have any new message or 4 rings if you don't. Ring time Press The system announces "Ring time" to save the setting. Set how much time callers have to leave messages. Select 1 or 4 minutes; select announce only (A ) to have the system answer but not let callers leave messages. Record time Press The system announces "Record time" use to: Press use to: Press use to: Press to save the setting. Have the system sound a tone when you have new messages. The tone sounds every 15 seconds until you listen to all new messages. Message alert Press The system announces "Message alert" to save the setting. Change the language of the voice prompts. Select English ( E ), French ( F ), or Spanish ( S ). This doesn't affect the handset display. Press Language The system announces "Language" Press to save the setting. The system beeps and returns to standby. 7-2. Setting Your Outgoing Message (Greeting) The answering system comes with two prerecorded outgoing messages, or greetings. The default greeting says: "Hello, no one is available to take your call. [. . . ] The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. Radio equipment The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone". 11-7. [. . . ]