User manual UNIDEN EX965

[. . . ] CONTENTS Important Safety Instructions . 21 Installing the Handset Battery Pack . 33 Answering a Call from the Base Unit . 40 1 Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. [. . . ] You may enter a delay between numbers (for accessing a switchboard, or long distance service) by pressing the pause button on the Base Unit at the point in the number sequence you wish to pause. Pressing pause more than once will increase the length of the pause between numbers. Press mem and a number ( 0-9 ) from the Base Unit keypad for the memory location. After pressing mem the second time, you have 20 seconds to enter the number you wish to store. Otherwise, an error tone will sound and the unit returns to Standby. You will hear a confirmation beep and the speaker LED goes out. Write the stored number and its memory location number on one of the enclosed stickers. h 3. h 4. 30 Entering Handset Memory Numbers For example, to store the nunmber 555-1212 in the Handset memory: 1. The LCD displays: Enter the number 5551212 on the Handset keypad. The LCD displays: You may enter a delay between numbers (for accessing a switchboard, or long distance service) by pressing the ch/pause button on the Handset at the point in the number sequence you wish to pause. The ch/pause button counts as one digit. Pressing ch/pause more than once will increase the length of the pause between numbers. Press mem. 2. h 3. 4. Enter a number ( 0-9 ) from the Handset keypad for the memory location. After pressing mem the second time, you have 20 seconds to enter the number you wish to store. Otherwise, an error tone will sound and the unit returns to Standby. You will hear a confirmation beep and the LCD displays: Write the stored number and its memory location number on one of the enclosed stickers. h 5. Storing Mixed Tone/Pulse Numbers If your Base Unit is set up for Pulse Dialing, you can store a mixed mode number to easily access long distance services or other services requiring Tone inputs. Entering Base Unit Tone/Pulse Memory Numbers For example, to enter 555-1212 as a pulse number followed by 12 as a tone number from the base unit: 1. Follow steps 1 and 2 in "Entering Base Unit Memory Numbers" on page 30. 5. The * button counts as one digit and enters a four second delay. If desired, press pause on the Base Unit to enter delays between numbers. Follow steps 3 and 4 in "Entering Base Unit Memory Numbers" on page 30. Entering Handset Tone/Pulse Memory Numbers For example, to enter 555-1212 as a pulse number followed by 12 as a tone number from the Handset: 1. Follow steps 1 and 2 in "Entering Handset Memory Numbers" on page 31. The tone button counts as one digit and enters a four second delay. [. . . ] s Do not charge the Rechargeable Nickel-Cadmium Battery used in this equipment in any charger other than the one designed to charge this battery as specified in this Guide . Using another charger may damage the battery or cause the battery to explode. RECHARGEABLE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY s Residents of Minnesota should contact 1-800-225-PRBA for information concerning reclamation and disposal of Rechargeable Nickel-Cadmium Batteries. s Residents outside of Minnesota should contact their local authorities for information concerning reclamation and disposal of Rechargeable Nickel-Cadmium Batteries. Controls and Functions Base Unit A. [. . . ]