User manual UNIDEN EZI2996

[. . . ] EZI2996 Series User's Guide What's in the box? EZI2996 expandable base with cordless handset Base AC adapter (PS-0034) Rechargeable battery pack (BT-1007) Battery cover Telephone cord You might also find: EZX290 accessory handset and charger Charger AC adapter (PS-0035) If you purchased You should model number: have: EZI2996 None EZI2996-2 1 of each EZI2996-3 2 of each 3 of each EZI2996-4 EZI2996-5 4 of each EZI2996-6 5 of each Rechargeable battery pack (BT-1007) Battery cover If any items are missing or damaged, contact our Customer Care Line immediately. Get answers 24/7 at our website: www. uniden. com. If You. . . have a question or problem Contact Uniden's. . . Customer Care Line* Phone Number 817-858-2929 or 800-297-1023 800-554-3988 800-874-9314 (voice or TTY) need a replacement part or accessory (such as a belt clip, Parts Department* headset, or wall mount bracket) need special assistance due to a Accessibility Help Line disability * During regular business hours, Central Standard Time. [. . . ] During a call, press bOOST to increase the volume of the audio. While audio boost is on, appears in the display. Press bOOST again to turn off. Using Text-To-Speech With the Text To Speech (TTS) feature, your phone can announce phone numbers or names in several different situations. When you. . . Receive a call Dial a number Open the phonebook The caller's name (if sent by a Caller ID service) The phone number you dialed The name of the entry you are looking at Things to know about TTS: You have to turn on TTS separately for each handset. Then, select TTS On/off, and select On or Off for each handset. To make sure it doesn't interrupt a call or an intercom page, the phone only uses TTS when it starts out in standby. For example, if you open the phonebook during a call, the phone won't announce the names in your phonebook. It takes at least 2 rings for the phone to receive Caller ID information and announce it. If the phone is answered before the end of the second ring, the phone won't have time to announce the name of the caller. To change the volume used for CID announcements, change the ringer volume. For other TTS features, change the handset speaker volume. The TTS feature only uses English to announce the name and numbers, regardless of what language is use for the display. Using a Voice Mail Service If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting; you can also program your access number so you can get your messages at the touch of a button. Setting Up Your Voice Mail When you sign up for your voice mail, your service provider should give you an access number and the message notification signal type. If you don't have this information, contact your provider before you start. ) With the phone in standby, open the menu. 2) Select Handset Setup, then select Edit Voice Mail. (You have to program the voice mail access number separately for each handset. ) ) Enter your access number exactly as you would dial it. If you need the phone to wait for a few seconds between digits (to wait for the service to answer, for example), press reDIaL/paUSe to insert a 2-second pause. If two seconds isn't long enough, you can insert as many pauses as you need, but each pause counts as one digit. Press SeLeCT/meNU when you're finished. ) From the main menu, select Global Setup, then Voice Mail Tone. ) If your voice mail service uses a Frequency Shift Keying or FSK message signal to let you know you a have new message, set the Voice Mail Tone to Off; if your service uses a Stutter Dial Tone or SDT signal, set the Voice Mail Tone to On. If you can't find out which signal your provider uses, leave the Voice mail Tone on. If you don't see the voice message icon ( ) when you know there's a new message, turn the Voice mail Tone off. Getting Your Messages When you have new messages, the voice message icon ( ) appears in the handset display. [. . . ] "Privacy of communications may not be ensured when using this telephone". one-year Limited Warranty Important: evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 2 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product. [. . . ]