User manual UNIDEN EZI996

[. . . ] 6 Getting Started Installing the Phone . Connect the Base Unit and Charge the Handset . 13 Activating Caller ID on Call Waiting . 15 Selecting the Ringer Tone and Volume . [. . . ] The displayed phone number dials automatically. Talk 2145551234 5/17 12:30PM 03 Jane Smith 214-555-1234 You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). 32 C A L L E R I D F E AT U R E S www. uniden. com Changing the Digital Security Code To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecure (which electronically locks your phone when the handset is in the base) and Random Code digital security (which automatically selects one of over 262, 000 digital security codes for the handset and base). If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1) Remove the handset from the base unit. Press and hold the find handset key on the base. 2) While holding the find handset key, place the handset in the base unit, and leave the handset on the base for more than 3 seconds. A new random security code is set. ADDITIONAL INFORMATION www. uniden. com A D D I T I O N A L I N F O R M AT I O N 33 Note on Power Sources Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, Emergency Dial programming, and the CID list. Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call. Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. Caution Use only the specified Uniden battery pack (BT-905). Do not remove the battery from the handset to charge it. [. . . ] The Product should include all www. uniden. com parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Fort Worth, TX 76155 (800) 297-1023, 8 a. m. [. . . ]