User manual UNIDEN UBC 30 XLT

[. . . ] UBC30XLT SCANNER 200 Channels Air band Receiver with FM Radio Precautions Before you use this scanner, please read and observe the following. EARPHONE WARNING!An incorrect earphone may be hazardous to your hearing. Turn down volume before connecting the earphone and then adjust volume to suit. WARNING! Uniden does not represent this unit to be waterproof. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. [. . . ] L/O – Lets you lock out a selected channel or skip a specified frequency. FNC + PRI – Sets and turns the priority function on or off. Increment the channel number and frequency, select the search direction. Decrement the channel number and frequency, select the search direction. About Your Scanner 21 Key Name Description VOL/SQ / DELAY VOL/SQ – Switches volume setting and squelch setting. FNC + DELAY – Change the delay time in Memory Scan Mode, Memory Hold Mode, Frequency Search Mode and Frequency Hold Mode. BAND / STEP BAND – Select the band in Frequency Search Mode and Memory Scan Mode. FNC + STEP – Change the steps in Memory Scan Mode, Memory Hold Mode, Frequency Search Mode or Frequency Hold Mode. PWR / LIGHT PWR – Press and hold for more than 2 seconds to turn the scanner on or off. FNC + LIGHT – Turn the display backlight on or off. About Your Scanner 22 A Look At The Display The display has indicators that show the scanner's current operating status. The display information helps you understand how your scanner operates. F - appears only when the function mode is on. FM - appears during FM Radio band is selected. AIR - appears during Air band is selected. VHF - appears during VHF High band is selected. MEM - appears during Memory Mode is selected. SQ - appears during squelch setting. P - appears when you select a priority channel. FREQ - appears during Frequency Mode is selected. HOLD - appears during Memory Hold Mode and Frequency Hold Mode. About Your Scanner 23 L/O - appears when you manually select a channel you locked out or a skip frequency. PRI - appears when the priority feature is turned on. - alerts you when the battery power gets low. - appears when you lock the key pad. Understanding Banks To make it easier to identify and select the channels you want to listen to, the 200 channels are divided into 3 channel-storage banks. Use each channelstorage bank to group frequencies for FM Radio, Air, and VHF High band. The number programmed into each bank depends on your choice. For example, You may program 70 channels for FM Radio band bank, 110 channels for Air band bank and 20 channels for VHF High band bank. Or, it is also possible to program 200 channels for only Air band. About Your Scanner 24 Operation Turning On The Scanner and Setting Squelch Note: Make sure the scanner's antenna is connected before you turn it on. Repeatedly press or to select the squelch level you want. Squelch is fully open at level 0, and most tight at level 10. [. . . ] Press L/O to lock out the channel, then press Scan to resume scanning. Care and Maintenance 35 Specifications Specifications Channels: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Frequency Range (in MHz): See page 7 Sensitivity (12 dB SINAD) 88. 050 MHz (WFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 9 µV 98. 550 MHz (WFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 9 µV 107. 950 MHz (WFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]