User manual UNIDEN UBC3500XLT

[. . . ] UBC3500XLT OWNER'S MANUAL OWNER'S MANUAL Precautions Before you use Precautionsthis scanner, please read and observe the following. Be sure to use only a monaural earphone with this scanner. You can also use an optional 32 stereo headset. Use of an incorrect earphone or stereo headset might be potentially hazardous to your hearing. [. . . ] To select a menu item, rotate the scroll control clockwise or counterclockwise. The currentlyselected menu item is highlighted with a bar on the display. When the menu item you want to select is highlighted, briefly press the scroll control to select it. To exit the menu mode, press Menu again or the L/O key. This table shows the scanner's menu structure. To find information about a particular menu setting in this manual, go to the page number shown in parentheses next to the setting. Note: Not all of the options shown in this table may appear at the same time. To view all available options on any screen, rotate the scroll control. Menu Item -- M E N U -Program System Srch/CloCall Opt Search for . . . Submenu Select System New System (32) -- M E N U -Program System Srch/CloCall Opt Search for . . . Srch/CloCall Opt Freq Lockouts Broadcast Screen CTCSS/DCS Search Srch/CloCall Opt Max Auto Store Set Delay Time Set Modulation Set Attenuator Set Data Skip Set Step Air Band Step Search for . . . Service Search Edit Service Custom SearchOpt Srch/CloCall Edit Custom Search and Store (70) (71) (16) (72) (74) (55) (72) (73) (73) (74) (75) -- M E N U -Program System Srch/CloCall Opt Search for . . . (59) (62) (60) (61) (63) 36 Menu Item -- M E N U -Srch/CloCall Opt Search for . . . Close Call Submenu Close Call Close Call Only CC Auto Store Set CC Mode Set CC Override Set CC Alert Set CC Bands Set Priority Off On Plus On Srch/CloCall Opt (66) (66) (66) (67) (67) (68) (39) (39) (39) (39) -- M E N U -Search for . . . Close Call Set Priority -- M E N U -Set Priority Tone-Out for . . . Tone-Out Standby Tone-Out Setup h/ l ll (76) (76) -- M E N U -Set Priority Tone-Out for . . . Wired Clone Wired Clone Master Slave Srch/CloCall Opt (42) (42) -- M E N U -Tone-Out for . . . Wired Clone Settings Settings Set Backlight Adjust Key Beep Set Battery Save Srch/CloCall Opt Set Audio AGC Adjust Contrast PC Control See Scanner Info (39) (38) (39) (40) (40) (40) (38) Using the Menu 37 Settings Settings System Information Displaying Viewing Memory Used Menu Settings See Scanner Info % Memory Used A bar showing the percent of memory used appears. Press any key to return to the previous menu. Viewing the Firmware Version Menu Settings See Scanner Info Firmware Version Press any key to return to the previous menu. Adjusting the Key Beep Menu Settings Adjust Key Beep Auto - the scanner automatically sets the key beep to match the master volume setting level you select. Level 1 - 15 the scanner lets you select a key beep level. You can choose any of 15 different key beep levels. Off - the scanner turns the key beep off. Locking/Unlocking the Keypad and Scroll Press and hold down Func then press / / to lock or unlock the keypad. Keypad Lock and On (if the keypad is locked) or Off (if the keypad is unlocked) appears. This does not affect the volume setting. The scroll control still controls the volume when you lock the controls. 38 Turning Power Save On or Off Menu Settings Set Battery Save · On The scanner goes into low-power mode when you monitor a conventional channel that has no activity. [. . . ] This help guides you through these steps that will make it easier for you to start scanning. Collect information about the system(s) you want to monitor. Do you want to listen to your local police and fire departments?How about the highway patrol, ambulance service, and aircraft? [. . . ]