User manual UNIDEN UM415

[. . . ] UM415 SUBMERSIBLE DSC MARINE RADIO RADIO MARITIME ASN OWNER'S MANUAL GUIDE D'UTILISATION Lift the red cover. Press and hold the DISTRESS button for three seconds. Your radio transmits your boat's location every few minutes until you receive a response. call and make a normal voice distress call. Making a Distress Call nOte: if the radio displays Enter User MMSI, cancel the automatic distress Making a Voice Distress Call Lift the red cover and press the DISTRESS button. Speak slowly - clearly - calmly. [. . . ] Press CLR to return to the User MMSI Entry screen save the user MMsi once. nOte: Be sure you entered the number correctly before confirming the entry. You can only English Group MMSI number You can change the group MMSI number as often as you want. Follow the steps below to enter a group MMSI number into the radio: Press and hold Setup Group MMSI Group MMSI 00_______ 16 The directory lets you store up to 20 MMSI numbers of other stations so you can call them quickly. Follow the steps below to edit the MMSI numbers in your directory: Press using the Directory 1. Display the normal menu and choose the Setup sub-menu. If one was entered previously, the screen displays it. Group MMSI numbers always start with a 0, so that digit is already entered for you. Use CHANNEL UP and CHANNEL DOWN to change the second of the nine digits; CHANNEL UP increases the number and CHANNEL DOWN button decreases it. When the second digit is correct, press the ENT-1W/25W. Enter the remaining seven digits of the MMSI number in the same way. If you make a mistake while entering a number, press CLR-SCAN to erase the wrong number and the cursor is moved to the left digit. When the ninth digit is correct, press ENT-1W/25W. The radio displays the new MMSI number and asks you to confirm. To save this MMSI number, select Yes and confirm the entry. The radio returns to the Setup menu. Back[CLR] Forward[ENT] Directory [New] MMSI 123456789 Name KENT NEWMAN Back[CLR] 16 1. 4. Press CALL-MENU to display the call menu. The screen displays any previously-entered MMSI numbers and names. To add a new MMSI number to the directory, select New. The radio prompts you to enter the nine-digit MMSI number. Use CHANNEL UP and CHANNEL DOWN to change the first digit; the CHANNEL UP button increases the number and the CHANNEL DOWN button decreases it. Select[ENT] English 5. When the first digit is correct, press ENT-1W/25W. Enter the remaining eight digits of the MMSI number in the same way. [. . . ] Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. FCC Information The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Uniden works to reduce lead content in our PVC coated cords in our products and accessories. lead warning Your UM415 has been designed to accommodate all of the popular marine VHF antennas. However, the selection and the installation of the antenna is the responsibility of the user or installer. The FCC has determined that excessive radiation poses a health risk to people near radio transmitting antennas. [. . . ]