User manual UNITED OFFICE KH 4418 LAMINATOR

[. . . ] â· Children should be supervised to ensure that they do not play with the appliance. â· Unplug the power cable after every use and before cleaning, so as to prevent the appliance from inadvertently switching itself on. The safety concept can work only if the appliance is in a faultless condition. â· Never perform hot lamination on flammable, heat-sensitive and/or meltable materials and do not laminate drawings on temperature-sensitive paper or material that will undergo changes in colour or quality when subjected to heat. [. . . ] attainment of the operating temperature is indicated by the lighting up of the green LED indicator lamp "Ready" u. For a more uniform laminating result we recommend, especially for thinner foils (below 125 Micron) and after adjustment to a different foil thickness, to first wait an additional 2-3 minutes before beginning with lamination. The red ON / OFF indicator lamp y and the green indicator lamp "Ready" u now glow. Lay the document to be laminated into a laminating pouch of the appropriate size. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. Make certain that you use only one pouch for laminating. For information about the lamination process, please read section 10. If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rollers inside the laminator will still be hot. If not already done, fold the trimming attachment d down. Pull the document support s out, so that the document can be pulled in straight into the slot for manual pouch input t. Insert the laminator plug into a mains power socket. Lay the laminating pouch onto the pouch guide q. Lay the right or left edge of the laminating pouch against the pouch format lock r (closed side leading). Slide the pouch format lock r together until the selected format size is reached. This prevents the laminating pouch from being pulled in at an angle. Should the laminating pouch be pulled in at an angle, use the "Anti-Blocking Funktion" as described in chapter 11. Now slide the laminating pouch slowly into the When you have slid the laminating pouch several Centimetres into the slot t, it will start to be pulled in automatically. Release the laminating pouch as soon as you notice it being pulled in automatically. Ensure there is at least 30 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamination. Turn the anti-blocking switch (ABS) o back to the desired foil thickness. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]