User manual UNITED OFFICE UAV 380 A1 CROSS CUT SHREDDER

[. . . ] Lay the power cable in such a way that no one can tread on or trip over it. The following safety instructions must always be complied with when using electrical appliances: · Do not place the appliance in close vicinity to sources of heat and water source . Do not use the appliance close to inflammable or explosive materials and/or ignitable gases or in dusty environments. Should the power cable or the plug become damaged, arrange for it/them to be repaired by authorised specialists or Customer Services as soon as possible. [. . . ] If need be, empty if first, so as to ensure an easier separation of paper and plastic waste. : NEVER place a finger into the central hole of a CD when you are feeding it into the appliance. Insert the CD from above into the middle of the CD/Credit card cutter opening e. clearing a material blockage: · Press and hold the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned. Place the switch w into position (OFF) as soon as the jammed item is returned. switching the appliance off: · To switch the appliance off, move the switch w into the middle position (OFF). Empty the waste container t/u regularly. Dispose of the waste material in an environmentally responsible manner. Emptying the large waste container (Paper) Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. Remove the cutter attachment q from the large waste container t. Remove the small waste container u at the front of the large waste container t, so that it does not fall out. Empty the large waste container t and then put everything back together again. emptying the small waste container (Plastic) · Remove the small waste container u from the front of the large waste container t to empty it. Notice regarding overheating of the appliance: If it overheats, the appliance switches itself off automatically. Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. To switch the appliance off, move the switch w into the middle position (OFF). Reinsert the power plug into the socket. Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. [. . . ] Reinsert the power plug into the socket. When the appliance is switched on, however, the shredding process will not start: · the appliance has overheated and triggered the automatic safety switch-off. Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. To switch the appliance off, move the switch w into the middle position (OFF). [. . . ]