User manual UNIVERSAL ELECTRONICS URC-3021

[. . . ] SET key The SET key is used to set up your TOTAL CONTROL and to access special functions. Number keys The number keys (0-9, 10, 20 (AV)) provide functions just like your original remote. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key. If your original remote has a 20 key, this function can be found under the AV key. [. . . ] Of course, your Television must have Teletext capability. When accessing the text mode, the colour keys marked red, green, yellow and blue, allow you to access the Fastext functions of your Television. If on your original remote control these keys are used for Menu navigation, the TOTAL CONTROL Fastext keys may operate the same. For a more detailed explanation of Teletext and Fastext, please refer to the manual of your Television. Remember, different televisions control Teletext and Fastext functions in different ways. Not all of the Teletext functions may be available on your particular model. 15 TEXT ON: Puts the television in the Teletext mode. TEXT OFF: Switches the television back to regular viewing mode. On some televisions, this may be done by pressing the TEXT ON key several times. EXPAND: Shows the top half of the Teletext page in larger letters. By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television. 16 Optional keys These keys are designed for use with digital satellites by Foxtel (setup code= 0902), Austar (setup code= 0665) or Pace (setup code= 0520). 5 Setting up your devices Example: to set up the TOTAL CONTROL for your Television: 1 Find your device code in the code section (page 12 ­ 25). If there are no blinks, the digit is "0". 1 5 For the second digit, press 2 and count all the red blinks. 2 6 For the third digit, press 3 and count all the red blinks. 3 7 For the fourth digit, press 4 and count all the red blinks. 4 - To blink back the code for your other devices follow the instructions above, only press the appropriate device key during step 1. Quick Code Reference Write down the codes for your devices in the boxes below and in the battery compartment for quick and easy reference. Code ssss ssss ssss ssss 8 The AUX key Example 1: To program a second television on the AUX key you need to change the AUX key into a TV key: 1 SET (*) P 9 9 2 TV AUX (**) The AUX key has now become a second TV key. 2 Now enter the Set Up code for your second TV by pressing: AUX SET (*) P ____ (TV Code ) (**) Example 2: To program a second Video recorder or DVD player on the AUX key you need to change the AUX key into a VCR/DVD key: 1 SET (*) P 9 9 2 VCR/ DVD AUX (**) The AUX key has now become a second VCR/DVD key. 2 Now enter the Set Up code for your VCR or DVD by pressing: AUX SET (*) P ____ (VCR or DVD Code) (**) Changing a Device key It is possible to change any device key. Example: To program a second Video Recorder or DVD player on the SAT key you need to change the SAT key into a VCR/DVD key: 1 SET (*) P 9 9 2 VCR/ DVD SAT (**) The SAT key has now become a second VCR/DVD key. 2 Now enter the Set Up code for your VCR or DVD by pressing: SAT SET (*) P _ _ _ _ (VCR or DVD Code) (**) Resetting a Device Key Example: To reset the SAT key press: SET (*) P 9 9 2 SAT SAT (**) (*) (**) Hold down the SET key until the red light blinks twice (the red light will blink once then twice). The red light blinks twice. 9 Volume Punch Through This feature allows you to adjust the volume in a certain mode (e. g. TV mode) while being in a different mode (e. g. Last key pressed: VCR/DVD SAT You can control: TV volume up and down, mute TV volume up and down, mute To punch through to TV volume while in VCR/DVD or SAT mode press: SET(*) 993 TV key. To cancel the "Volume Punch Through" press: SET(*) 993 Volume(+) (the red light will blink four times). (*) Hold down the SET key until the red light blinks twice (the red light will blink once then twice). Colour & Brightness Depending on the functions of your original remote control, the TOTAL CONTROL can operate the colour and brightness settings of your Television. [. . . ] TOTAL CONTROL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country. [. . . ]