User manual UNIVERSAL REMOTE CONTROL INSIGHT M1057

[. . . ] In the Cable mode, press FAV once to display programmed favorite cable channels. Use CH+ (or CH-) to select the next higher (or lower) channel. When controlling a DVD player, use CH+ (or CH-) to skip forward (or skip reverse) through video. Use the keypad (0 ~ 9) to directly select the channels (e. g. , 9 or 31). PROGRAMMING DEVICE CONTROL The ON DEMAND Custom 3-Device Universal Remote Control is preprogrammed at the factory to operate the Cable Box supplied by your cable system, an RCA TV, and an RCA VCR (in the AUX mode). [. . . ] See Programming Device Control for instructions. 2. 3. 3. Press and hold Setup until the selected mode key blinks twice, then release Setup. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first. Enter the first four-digit code for your device. If you perform this procedure correctly, the selected mode key will blink twice. NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code. 5. 6. Press Setup once to lock in the code. To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for. USERS GUIDE OVERVIEW The ON DEMAND Custom 3-Device Universal Remote Control will control up to three home entertainment devices, including a Cable Box (used by your cable system), a TV, a VCR, an Audio Amplifier or Receiver, a DVD player, or a PVR. The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. In the AUX or TV mode, use the transport keys to control a VCR, PVR, or DVD player. To record a program on a VCR, press REC twice. In the Cable mode, use the keys to control ON DEMAND programs. Use A, B, or C to access interactive program guide functions on your Scientific Atlanta Explorer, Pioneer Voyager, or Pace Cable Box. Use Lock to restrict viewing of selected programs (Parental Control) on your Motorola (GI or Jerrold) Cable Box. Use PPV to access information on available Pay-Per-View movies and events on your Motorola (GI or Jerrold) Cable Box. Use Page+ (or Page-) to page up (or down) through menu screens and the interactive program guide. Use Guide to display the interactive program guide. 4. 4. 5. CHECKING THE CODES If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. Perform the following steps after setting up your devices to find out which four-digit code operates your equipment. For example, to find out which code is operating your TV: 1. Then press and hold Setup until the TV key blinks twice, then release Setup. [. . . ] Press and hold Setup until the selected mode key blinks twice, then release Setup. Enter 9 - 9 - 3 and then press VOL+ once. The mode key will blink four times, confirming unlock. Now, volume controls for all devices can be independently controlled in their own modes. 2. 3. [. . . ]