User manual UNIVERSAL REMOTE CONTROL INSIGHT M2067BX3

[. . . ] Use vOl+ (or vOl-) to raise (or lower) the sound volume. Press Mute once to turn sound off or on. In the Cable mode, press Fav once to display programmed favorite cable channels. Use CH+ (or CH-) to select the next higher (or lower) channel. [. . . ] Then press and hold setup until the Cable key blinks twice, then release setup. Now, the remote control will provide TV or cable channel control capabilities while in the tv or Cable mode. 4. 3. 7. For future reference, write your device code in the appropriate boxes below: aUX Code: 3. 4. Unlocking all volume Controls (global volume Unlock): 1. Press and hold setup until the selected mode key blinks twice, then release setup. Enter 9 - 9 - 3 and then press vOl+ once. The mode key will blink four times confirming unlock. Now, volume controls for all devices can be independently controlled in their own modes. re-activating Channel Control lock 1. On the remote control, press Cable once. Then press and hold setup until the Cable key blinks twice, then release setup. Now, regardless if you select the tv or Cable mode, only the channel control capability of your cable box will be accessible. Device Type:______________ tv Code: 5. Repeat steps 1 to 7 for another device you want to control. 2. 3. User guide Overview The ON DEMAND Custom DVR 3Device universal remote will control up to three home entertainment devices, including a Digital Video Recorder enabled Cable Box. The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. The ON DEMAND Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Cable system, an RCA TV, and an RCA VCR (in the aUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section: 1. Turn on a device (e. g. , VCR or DVD Player) and, if applicable, insert media, (e. g. , video cassette or disc). NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. PrOgraMMing deviCe COntrOl searCHing FOr YOUr COde If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then: 1. Then press and hold setup until the tv key blinks twice, then release setup. Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device 5. Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Repeat step 4 four more times for the remaining digits. [. . . ] The affected keys are 0 ~ 9, CH+, CH-, enter, and last. This will guarantee that you do not inadvertently change a channel while in the TV mode. However, you can turn off this feature to allow full access to these keys in the tv and Cable NOTE: When batteries need replacement, the remote control will stop operating. Replace the old batteries and the unit will be restored to its full functionality, complete with your favorite settings. 6. [. . . ]