User manual UNIVERSAL REMOTE CONTROL M1067BX3

[. . . ] Use vOl+ (or vOl-) to raise (or lower) the sound volume. Press Mute once to turn sound off or on. In the Cable mode, press Fav once to display programmed favorite cable channels. Use CH+ (or CH-) to select the next higher (or lower) channel. [. . . ] If it still does not work, try Searching For Your Code. NOTE: If the device does not have a Power key, press the (Play) key. 4. 3. 7. For future reference, write your device code in the appropriate boxes below: aUX Code: 3. 4. Unlocking all volume Controls (global volume Unlock): 1. Press and hold setup until the selected mode key blinks twice, then release setup. Enter 9 - 9 - 3 and then press vOl+ once. The mode key will blink four times confirming unlock. Now, volume controls for all devices can be independently controlled in their own modes. re-activating Channel Control lock 1. On the remote control, press Cable once. Then press and hold setup until the Cable key blinks twice, then release setup. Now, regardless if you select the tv or Cable mode, only the channel control capability of your cable box will be accessible. 2. 3. Device Type:______________ tv Code: 5. Repeat steps 1 to 7 for another device you want to control. 3. User guide Overview The Comcast Custom DVR 3-Device universal remote will control up to three home entertainment devices, including a Digital Video Recorder enabled Cable Box (used by Comcast Systems). The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the aUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section: 1. Turn on a device (e. g. , VCR or DVD Player) and, if applicable, insert media, (e. g. , video cassette or disc). NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. PrOgraMMing deviCe COntrOl searCHing FOr YOUr COde If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then: 1. Then press and hold setup until the tv key blinks twice, then release setup. Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device 4. Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Repeat step 4 four more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit. [. . . ] This will guarantee that you do not inadvertently change a channel while in the TV mode. However, you can turn off this feature to allow full access to these keys in the tv and Cable modes. NOTE: When batteries need replacement, the remote control will stop operating. Replace the old batteries and the unit will be restored to its full functionality, complete with your favorite settings. Press setup once to lock in the code. The tv key will blink twice. To search for the codes of another device, repeat steps 1 to 5, but substitute the aUX key for the auxiliary device you are searching for. Unlocking volume Control For a single device (individual volume Unlock): 1. [. . . ]