User manual UNIVERSAL REMOTE CONTROL MX-810

[. . . ] All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. Printed in Korea Universal Remote Control, Inc. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 TABLE OF CONTENTS Introduction to the MX-810 Optional RF "No Rules" Operation Installing and Charging the Battery Programming the MX-810 Using the MX-810 to Manually Control a "Device" Using the MX-810 to Automate an "Activity" Using the Help System for Automated Activities Accessing the MX-810's Setup Menus Selecting from the Setup Menus Setting the Color Screen Setting the Button Lighting System Menu Setting the Button Beep Volume Date and Time Menus Erasing and Resetting USA Limited Warranty Statement Specifications Contact Us Your Programming Notes - Devices Your Programming Notes - Activities 1 2 3 4 5 6 7 7 8 8 9 10 11 12 13 13 14 14 15 16 MX-810 OWNERS MANUAL Congratulations! You've purchased a unique synthesis of hardware and software engineering, the Complete Control MX-810. The MX-810 achieves a magnificent combination of power and flexibility, simplifying and automating operation of even the most complex system. [. . . ] For example, if you press Watch DVD, a whole sequence of events happens: 1. The AUDIO system changes to the DVD input. The DVD player begins to PLAY. While the MX-810 is reconfiguring your AV system, a status message on the MX-810 lets you know that it is busy. This reconfiguration of your system can take ten to twenty seconds on some systems. Status Message When the Status message disappears, all of the MX-810's buttons and screens are optimized for the activity you selected. The Volume and Mute buttons control the sound you hear. The rest of the buttons on the remote have new functions, so that the functions you need most frequently are immediately available. Page 6 MX-810 OWNERS MANUAL Using the Help System for Automated Activities After selecting an activity, if any of the devices or components don't seem to be on or are set incorrectly, use the Help button. There may be several help screens to help you with your activity as shown here: Once the help screens appear, look at your system. If anything is off, use the buttons on the first screen to power them on, then press NEXT (the PAGE button). The second and third screens enable you to correct an input. Additional screens may appear if your system is custom. Exit help by pressing the HELP button again. Accessing the MX-810's Setup Menus The MX-810 has internal setup menus that enable you to change the settings that control your color screen, the button lighting, battery warnings and the clock. To access these settings, you must press and hold two buttons at the same time as shown here: At the same time, press and hold both the ACTIVITIES button and the ENTER button. When the SETUP screen appears, you can release the two buttons. Page 7 MX-810 OWNERS MANUAL Selecting from the Setup Menus There are two pages of settings on the Setup Menu. To select, simply press the corresponding button. Select the setting you'd like to adjust by pressing the button beside the screen. Use the Page button to see other pages. Exit the Setup Menus by pressing the Activities or Devices button, or simply waiting (the setup menus time out in 30 seconds). Setting the Color Screen Although usage of the color screen will affect how frequently you have to charge the battery, the screen does not drain the battery as quickly as the button lighting does. Adjust the brightness of the screen to taste. In most lighting conditions, 50% gives good results. The Pick Up sensor senses motion, so it will keep the screen on (and drain your battery charge) as long as you are holding it in your hand. If you turn off the Pick Up sensor you will extend battery life (the screen will still light up when you press any button). Adjust how long the screen stays lit after you put it down or stop using it here. Setting Brightness Use the buttons next to DIM and BRIGHT to adjust the brightness. You'll see the screen dim and brighten. When you have the right setting, press SAVE. [. . . ] UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATEMENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. [. . . ]