User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 5600MAN

[. . . ] URC 5600 Cinema 5 Previous Model Name: Big Easy HT OVERVIEW Thank you for purchasing the One For All® Cinema 5 universal remote control. Before you can use your new remote , you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Cinema 5 and enjoy your new remote control. FEATURES AND FUNCTIONS Here are the features and functions of the Cinema 5 universal remote control. [. . . ] Receiver/Tuner Brand: Locate the brand name of your Receiver/Tuner in the "Setup Codes For Receivers/Tuners" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 5 to operate your Receiver/Tuner. To program the Cinema 5 to operate your Receiver/Tuner: 1. Press and hold SETUP until the Cinema 5's red light blinks twice, then release SETUP. Enter the first four-digit Receiver/Tuner code listed for your brand in the "Setup Codes For Receivers/Tuners" section. If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code. Aim the Cinema 5 at your Receiver/Tuner and press POWER. If your Receiver/Tuner does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Receiver/Tuner. Your Cinema 5 is now programmed to operate your Receiver/Tuner. Write your Receiver/Tuner code in the boxes to the left for future reference. Remember, if you want to use your Cinema 5 to operate your Cable Converter or Satellite, press the CBL/SAT key first. SEARCHING FOR YOUR CODE If your TV, VCR or Cable Converter does not respond to the Cinema 5 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the Cinema 5 to operate your TV, then: 1. Press and hold SETUP until the Big Easy HT's red light blinks twice, then release SETUP. 3. Slowly alternate between pressing POWER* and TV until your TV turns OFF. Make sure that the Cinema 5 is aimed at your TV during the search. You may have to press this sequence of buttons (POWER* then TV) up to 100 times to search the entire library of codes. When your TV turns OFF, press and release SETUP to lock in the code for your TV. Aim the Cinema 5 at your Cable Converter or Satellite and press POWER. Your Cable Converter or Satellite should turn off. If your Cable Converter or Satellite does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Cable Converter or Satellite. 2. For the first digit of your four-digit code, press 1 and count the number of times the red light (LED) blinks on the Big Easy HT. If the light does not blink when you press the number 1, the digit is zero. [. . . ] Even if your original Cable Converter remote control did not have a sleep timer, your Cinema 5 has its own built-in sleep timer. If your Cable Converter does not have a sleep timer, press the SLEEP key to activate the Cinema 5's built-in sleep timer. Press and release the CBL/SAT key then press the SLEEP key once to set the Cinema 5's built-in sleep timer for 15 minutes. Each additional press of the SLEEP key will add 15 more minutes to the Sleep Timer, up to a maximum of 60 minutes. [. . . ]