User manual UNIVERSAL REMOTE CONTROL R50 QUICK START GUIDE

[. . . ] Note: In actual use, the R50 protects itself if it gets stuck between couch cushions (with a button being continuously pressed). After 30 seconds the R50 will turn off, and will not turn on again until the button is released. The Volume and Mute buttons always control the sound regardless of what screen is displayed. This is setup by using Copy and Paste to copy the commands from your TV or Audio system to the Volume and Mute buttons on all of your other devices. 1 Replace all your remotes! You need to search the database built-in to the R50 for the "code sets" for each of your components. [. . . ] However, you can delete devices and recreate them in another position. 7 Simple Sound via Copy In most Home Theaters, the sound is controlled by either the TV speakers or the Surround Sound speakers. It is inconvenient to have to press MAIN then TV, then press the Volume up, Volume Down or Mute buttons. Instead, copy the commands from the TV or AUDIO device to all your other devices. Simple Sound means that you simply press Volume Up, Down or Mute anywhere and your sound volume changes. Select Copy and Paste from the Advanced Setup menu to setup Simple Sound convenience. Note: The Copy and Paste feature is not limited to volume and can also be applied to channel or other functions. If you find yourself switching to a particular device frequently to use a group of controls, consider using Copy and Paste for another group, as listed here: VOL - Volume Up, Volume Down and Mute CH - Channel Up, Channel Down and Prev. Channel PLAY - Play, Stop, Pause, Rewind and Fast Forward MENU - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel NUMBERS - The number keypad including ENT and . /-. POWER ON- The Power On Button only POWER OFF- The Power Off Button only 8 What's a Macro? Practice turning off the system by pressing MAIN, selecting a device, then pressing the OFF button. Note that you have to press three buttons for each device to turn it off. Wouldn't it be easier to simply press MAIN, then OFF and watch all of your devices turn off, one after another?You specify that when a particular button is pressed, a whole sequence of commands goes out, one at a time. To setup a macro, practice with the R50 first. You need to record each step you make, so familiarize yourself with the routine then try recording it. If the routine is complicated, don't worry. The R50 can record up to 255 steps to one button as a Macro. [. . . ] This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States of America. This Limited Warranty specifically excludes products sold by unauthorized resellers. [. . . ]