Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual UNIVERSAL REMOTE CONTROL UR2-CBL-CV01. We hope that this UNIVERSAL REMOTE CONTROL UR2-CBL-CV01 user guide will be useful to you.
Lastmanuals help download the user guide UNIVERSAL REMOTE CONTROL UR2-CBL-CV01.
Manual abstract: user guide UNIVERSAL REMOTE CONTROL UR2-CBL-CV01
Detailed instructions for use are in the User's Guide.
[. . . ] STEP3 Replace the battery compartment cover.
STEP3 Point the remote control toward the TV and enter the three-digit code number assigned to your brand from the code tables. *Tip : The TV will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [iO] button, the TV should turn on or turn off. [. . . ] Release the [CH+] or [CH-] button as soon as the TV truns off. *Tip : You can verify that you selected the correct code by pressing the [iO] button again. The TV should either turn on or turn off. STEP4 Press the [TV] button to store the code. The iO button will blink to confirm that the code has been stored.
5 Programming the Remote Control.
A. Three-Digit Code Programming Method.
4 Operations
Default State : Device Default: SONY DHG-M55CV Volume Default: Cable Refer to section D for programming the volume and mute through your TV or Cable.
The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of TV. The three-digit code numbers are listed in the code table of the instruction manual. STEP1 Turn on the TV you wish to program. STEP2 Press the [TV] button and the [DONE] button simultaneously for 1 second. The iO button will turn on indicating the unit is ready to be programmed. *Tip : The iO button will light on for 20 seconds. The next step must be entered while the iO button is on.
Universal Remote Control, Inc.
www. universalremote. com
OCE-0035A Rev 08 (10/18/07)
www. universalremote. com
C. To Find the Three Digit Code Number That was Stored in the TV.
STEP1 Press the [TV] button and the [DONE] button simultaneously for 1 second. *Tip : The iO button will light on for 20 seconds. The next step must be entered while the iO button is on. The iO button will blink number of times indicating the number of each digit of the code number. [. . . ] The iO button will blink to confirm the programming. To return to original state: If you wish you can control the volume via your TV, repeat the above steps by pressing [TV] in STEP3 .
E. Low Battery Warning.
When the battery is low (2. 0V-2. 3V) and needs to be replaced with fresh batteries, the iO button will blink five times whenever a [DEVICE] button is pressed to turn on equipment.
F. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE UNIVERSAL REMOTE CONTROL UR2-CBL-CV01
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual UNIVERSAL REMOTE CONTROL UR2-CBL-CV01 will begin.
