User manual UNIVERSAL REMOTE CONTROL UR4-EXP PIONEER VOYAGER & SCIENTIFIC-ATLANTA EXPLORER

[. . . ] *Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on. The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the LED being turned off. [. . . ] STEP1 Press the [CBL] button to select the CBL mode. STEP2 Press the [A, B, or C] button and [SELECT] button simultaneously for 3 seconds. The [CBL] device LED will turn on for 20 seconds. STEP3 Press up to 10 buttons you wish to store. The [CBL] device LED will blink once for each command entered. STEP4 Press the [CH+] button to store the functions that were selected. The [CBL] device LED will blink twice to confirm the storage of functions. B. Auto Search Method. If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps: STEP1 Turn on the equipment you wish to operate. STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the [SELECT] button simultaneously for 3 seconds. Programming a second TV to AUX Mode. STEP1 Press the [AUX] button to be programmed and the [SELECT] button simultaneously for 3 seconds. The [AUX] device LED will turn on. *Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on. STEP2 Press the [TV] device button to pick up the TV code table. STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your TV brand from the code tables. STEP4 Store the three-digit code number by pressing the [AUX] button once again. The device LED will blink twice to confirm that the code has been stored. 4 Operations Default State: Device Default: CABLE Channel Default: CABLE channel and number keys through the CABLE, with the option of controlling channel and number keys through the TV or VCR. Refer to section F for programming the channel and number keys through your TV or VCR. Volume Default: CABLE volume and mute through the TV, with the option of controlling volume and mute through the Cable box or Audio. Refer to section G for programming the volume and mute through your Cable box or Audio. System On/Off button: This button is designed to send out power commands for two, three or all four devices with one button press. Please refer to section E for details. I. Low Battery Warning. When the batteries are low and need to be replaced with fresh batteries, the remote control LED will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment. 5 Programming the Remote Control A. [. . . ] Memory Lock System. This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control. E. Programming the System On/Off Button. This is designed to program the System On/Off button so that it can send out up to four power on/off commands with one button press. STEP2 Press the [SYSTEM] button and the [SELECT] button simultaneously for 3 seconds. The [CBL] button will turn on for 20 seconds. K. [. . . ]