User manual UTSTARCOM PPC6700

[. . . ] Sprint PCS Vision® Smart Device PPC-6700 www. sprint. com © 2006 Sprint Nextel. No reproduction in whole or in part without prior written approval. SPRINT, the "Going Forward" logo, the NEXTEL name and logo, and other trademarks are trademarks of Sprint Nextel. Printed in the U. S. A. Welcome to Sprint Sprint and Nextel have come together offering you more choice and flexibility to do whatever you want, whenever you want. [. . . ] This allows you to connect your PPC-6700 via infrared to a PC. Tap Start. Set Up Your PC Before you start using Wireless Modem with an IrDA connection, you must configure a new modem on your PC and obtain the Username and Password from your Internet service provider (ISP). To configure a modem on your PC: 1. On your PC, select Start > Settings > Control Panel. Select the Don't detect my modem; I will select it from a list check box. In the Manufacturers list, select Standard Modem Types. Select Standard 33600 bps Modem, and then click Next. Select the modem port on which you want to install the drivers. Now, when you check the Modems tab in the Phone and Modem Options dialog box, a Standard 33600 bps Modem appears in the modem list. On the General tab, select Float control to None. Click OK until the modem installation wizard exits. To create a new dial-up connection: After a new standard modem has been set up on your PC, you must create a new dial-up connection. On your PC, select Start > Settings > Control Panel. Double-click Network and Dial-up Connections. Click I want to set up my Internet connection manually, or I want to connect through a local area network (LAN), and then click Next. Click I connect through a phone line and a modem, and then click Next. Select the Use area code and dialing rules check box. Enter the telephone number as #777, and then click Next. Enter the user name and password you use to log on to your ISP, and then click Next. Enter a name for this connection, and then click Next. Select No when the installation wizard prompts you to set up an Internet mail account, and then click Next. Click Finish to exit the wizard. Section 6: Getting Connected 87 Connect Through a USB Port To connect through a USB port, you need to first set up a USB modem on your PC. Before setting up a USB modem, verify that you have the following files: PPC6700SP by Sprint Dialer. exe PPC6700SP by Sprint. INF Both files are available on the Getting Started CD. Run the Getting Started CD from the CD-ROM of your PC and do the following on your PPC-6700: 1. [. . . ] Votre reçu daté montrant la date d'achat constitue votre preuve de la date d'achat. LIMITES DE GARANTIE Dans les douze (12) premiers mois suivant la date d'achat, la seule obligation d'Utstarcom en vertu de cette garantie explicite consistera à réparer ou remplacer les pièces ou le produit défectueux (à l'aide de pièces neuves ou reconstruites). Si la réparation ou le remplacement n'est pas raisonnablement praticable, Utstarcom peut, à son entière discrétion, rembourser à l'Acheteur le prix d'achat payé pour le produit. Pour obtenir des réparations ou un remplacement en vertu des modalités de la présente garantie, le produit doit être livré avec une preuve de couverture de garantie (par exemple, une facture datée), l'adresse de retour du consommateur, son numéro de téléphone au travail et/ou numéro de télécopieur et une description complète du problème, frais de transport prépayés, à la Société à l'adresse apparaissant ci-après ou au point d'achat pour réparation ou remplacement. [. . . ]