User manual VANTAGE HD 8000S

[. . . ] MANUAL HD 8000S Safety Instructions This product has been manufactured to satisfy the international safety standards. Please read all of safety and operating instructions before operating the product and keep this manual for future reference. MAINS SUPPLY AC 90-250V~, 50/60Hz Operate your product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. [. . . ] 4 If you press the YELLOW button, onscreen navigation menu is highlighted. Use the Arrow buttons to move the motor to the west, east, north, and south in order. Position of the motor can be restricted to the software setting limits (West/East) using the RED / BLUE buttons. 5 Press the YELLOW button to highlight Satellite. · This function may not work depending on the type of USALS program. 6 Enter the value of 000. 0 E/W (latitude) and 000. 0 N/S (Longitude) and then press the OK button on the Go to X menu. Motor changes its position according to the selected satellite. 7 Confirm the Enable Limits/Disable Limits function pressing the OK button. You will be prompted to decide whether to use the West/East setting Limits setting value. · This function may not work depending on the type of USALS program. · Press OK in Go to Reference menu, the motor moves at zero longitude/latitude. 24 English Chapter 5 >> Main Menu Installation Positioner 1 This function is used when receiving DiSEqC 1. 2 Command with the adaptor that controls positioner antenna. Select a satellite using the Arrow (/) buttons and press the OK button. On the satellite list, you can select satellites pressing the OK button. Press the RED (Last) button to save the selected satellites. 2 If you press the YELLOW (Audio) button, onscreen navigation menu is highlighted. Use the Arrow (///) buttons to move the motor to the west, east, north, and south in order. Position of the motor can be restricted to the software setting limits (West/East) using the RED / BLUE buttons. 3 Press the OK button on the Go to satellite menu. Dish changes its position to the direction of satellite. 4 Press the OK button on the Save Current Position menu. Current position of the motor is saved according to the selected satellite. Motor changes its position to the zero longitude/latitude where the count begins. [. . . ] Composite Video: Composite video is the format of an analog television (picture only) signal before it is combined with a sound signal and modulated onto an RF carrier. Composite video is often designated by the CVBS acronym, meaning any of "Color, Video, Blank and Sync", "Composite Video Baseband Signal", "Composite Video Burst Signal", or "Composite Video with Burst and Sync". Lettebox: Letterboxing is the practice of transferring widescreen film to video formats while preserving the film's original aspect ratio. On video displays with a 4:3 aspect ratio, the resulting videographic image has mattes (black bars) above and below it; LTBX is the identifying acronym for films and images so formatted Pan & Scan: Pan and scan is one method of adjusting widescreen film images so that they can be shown within the proportions of a standard definition 4:3 aspect ratio television screen, often cropping off the sides of the original widescreen image to focus on the composition's most important aspects. [. . . ]