Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual VDO CYCLECOMPUTING A4. We hope that this VDO CYCLECOMPUTING A4 user guide will be useful to you.
Lastmanuals help download the user guide VDO CYCLECOMPUTING A4.
Detailed instructions for use are in the User's Guide.
[. . . ] At overflow of 999. 99 counting re-starts at 000. 00. Shows accumulated Total Trip Distance data of all individual trips. Value is re-settable after change of battery. To prolong battery life, the A4 will automatically enter , , sleep" mode after 3 minutes of nonuse. [. . . ] Use MODE-button to select km or m-reading. STEP 3 Press SET-button to confirm above selection. The A4 will now show the set-mode for the wheelsize = wheel circumference. P06
F
P06
F P05
5. 3 PROGRAMMING THE WHEELSIZE After pressing SET-button to confirm km or m selection, the A4 will now show the set-mode for the wheelsize = wheel circumference. Factory settings for wheelsize are 2155 mm for km-reading and 84, 8 inch for m-reading. Attention: For km-reading the wheelsize needs to be set in mm, for m-reading the wheelsize needs to be set in inches. STEP 1 Change the flashing wheelsize-digit to requested value by pressing the MODE-button. P06 STEP 2 Press SET-button to confirm this setting and move to next digit. STEP 3 Repeat Step 1 and Step 2 until all digits have been set to your wheelsize. STEP 4 Press and Hold SET-button for 3 sec. to finish Wheelsize-Setting and return to TRP-display.
F
P07
5. 4 CLOCK SETTING Your VDO A4 shows actual time in 24:00 (hh:mm) format. The Clock SET-Mode will be shown in display. STEP 2 Use the MODE-button to change the flashing hour-digits. Confirm your settings by pressing the SET-button. This confirmation will also change to Minute-setting. STEP 3 Use the MODE-button to change the flashing Minute- digits. STEP 4 Press and hold SET-button for 3 sec. to finish Clock-Setting and return to CLK-display.
F P07
P08
5. 5 PROGRAMMING OF ODOMETER The total distance counter ODO can be programmed anytime, for example after a change of battery or to enter the ODO data of your old computer into your new A4. STEP 1 Get ODO into display, press and Hold SET-button for 3 sec. The ODO-Set-Mode will be shown in display. P08 STEP 2 Press MODE-button to change the flashing digit to requested value. Confirm this setting by pressing the SET-button and simultaneously change to next digit (flashing). [. . . ] Due t possible model changes, your model might have been discontinued. In the event that you should have a complaint, please first contact the retailer where you purchased your VDO computer. If the retailer is unable to help, you can return your computer to: Cycle Parts GmbH, Große Ahlmühle 33, D-76865 Rohrbach. In case of technical queries, please contact our customer-service-hotline: +49-6349-9635-10. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VDO CYCLECOMPUTING A4
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual VDO CYCLECOMPUTING A4 will begin.
