Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual VDO CYCLECOMPUTING A8. We hope that this VDO CYCLECOMPUTING A8 user guide will be useful to you.
Lastmanuals help download the user guide VDO CYCLECOMPUTING A8.
Detailed instructions for use are in the User's Guide.
[. . . ] Is shown on right side by "Speed-Arrows" (s) = actual speed higher than average speed P02 (st) = actual speed same as average speed (t)= actual speed lower than average speed Shows Trip Distance of actual ride, up to 999. At overflow of 999. 99 counting re-starts at 000. 00. Values for ATM, AVS and MXS will simultaneously be reset to Zero. Counts up to 9:59:59 (h:mm:ss) At overflow of 9:59:59 re-starts counting from 0:00:00. [. . . ] STEP 3 Measure the distance between the marks in millimetres or inches (1 inch = 25. 4mm). This value is your wheel size = wheel circumference. 5. 2 SELECTION OF km OR m-READING The VDO A8 can show speed and all related data either in km or Miles. You can switch at any time from km to m-reading and vice versa. All data TRP, AVS, MXS, ODO will automatically be re-calculated. STEP 1 Get TRP in display, press and hold SET-button for 3 sec. Use MODE-button to select km or m-reading. STEP 3 Press SET-button to confirm above selection. The A8 will now show the set-mode for the wheelsize = wheel circumference.
F
P07
P07
F P06
P08
5. 3 PROGRAMMING THE WHEELSIZE After pressing SET-button to confirm km or m selection, the A8 will now show the set-mode for the wheelsize = wheel circumference. Factory settings for wheelsize are 2155 mm for km-reading and 84, 8 inch for m-reading. Attention: For km-reading the wheelsize needs to be set in mm, for m-reading the wheelsize needs to be set in inches. STEP 1 Change the flashing wheelsize-digit to requested value by pressing the MODE-button. P07 STEP 2 Press SET-button to confirm this setting and move to next digit. STEP 3 Repeat Step 1 and Step 2 until all digits have been set to your wheelsize. STEP 4 Press and Hold SET-button for 3 sec. to finish Wheelsize-Setting and return to TRP-display.
F
5. 4 CLOCK SETTING Your VDO A8 shows actual time in 24:00 (hh:mm) format. The Clock SET-Mode will be shown in display. STEP 2 Use the MODE-button to change the flashing hour-digits. Confirm your settings by pressing the SET-button. This confirmation will also change to Minute-setting. STEP 3 Use the MODE-button to change the flashing Minute- digits. STEP 4 Press and hold SET-button for 3 sec. [. . . ] Warranty disclaimer VDO Cycle Parts warrants your VDO-Computer for 5 years from date of purchase. This warranty covers defects in material and workmanship. Defects on cables, senders, transmitters and mounting materials resulting from normal wear and tear, improper care, accidents, abuse or alteration are not covered by our warranty. Opening the computer housing (except for the battery door) is considered abuse, thus not covered by our 5 year warranty. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VDO CYCLECOMPUTING A8
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual VDO CYCLECOMPUTING A8 will begin.
