User manual VDO DAYTON CD 1204

[. . . ] Thank you for purchase this product which has been designed and manufactured to the highest standards and subjected to rigorous testing. IMPORTANT This device has been designed and produced according to applicable Safety Regulations. Please read carefully the instruction manual and use the device as intended. Keep this manual handy in your car for future reference. [. . . ] RADIO OPERATION BAND SELECTION At tuner mode, press softkey button F1 (7) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 MW LW By turning AUDIO ADJUST button (2), different setting levels can be adjusted. Note: Bass/Treble selections are only active when the DSP (Digital Sound Processor) is switched off. Press SOUND button (22) for 2 seconds, it will trigger a series of advanced RDS setting. Refer to RDS (Radio Data System) operation section for details. Item DSP Volume Bass Treble Balance Fader Bass Boost OFF 0 -10 -10 -10 -10 OFF BB 1 0 0 0 0 BB 2 BB 3 Range of adjustment FLAT CLASSIC POP ROCK 100 + 10 + 10 + 10 + 10 A/. DSP mode Press SOUND button (22) to turn on sound DSP function (Digital Sound Processor) and to select desired audio mode. There are five kinds of mode as below: FLAT CLASSIC POP ROCK DSP OFF 8 STATION SELECTION Press button (10) or button (11) shortly to activate automatic seek function. Press for 2 seconds until "MANUAL" appeared on the display, the manual tuning mode is selected. If both buttons have not pressed for several seconds, they will retune to seek tuning mode and activate automatic seek function. AUTOSTORE - Automatic Memory Storing Press FUNC button (23), to activate AST Function by soft key button F3, the radio searches for 6 strongest stations and stores them into the presets of the currently selected band. Note: Any stations that were previously stored in this memory bank are replaced by the new stations. Press Softkey button F2 (8) shortly to scan all frequency throughout the entire band. STATION STORE AND RECALL Press any one of the preset buttons (1 to 6) to recall a station which had been stored in the memory. Press a preset button for 2 seconds, previous preset station can be overwritten by current tuned frequency. RDS (RADIO DATA SYSTEM) OPERATION The RDS data are the PI, PS, TP, PTY, TA and AF data. PI: Program Identification Code Code for identifying program PS: Program Service Name Broadcast station name data expressed in alphanumerically character TP: Traffic Program Identification Identification data for traffic information broadcasting station TA: Traffic Announcement Identification Identification data showing traffic information is being transmitted or not AF: Alternative Frequencies Frequency list of broadcasting station transmitting the same program Setting AF Mode - Press Softkey button F2 (8) briefly to Switch on/off AF mode. - Whenever AF is switched on, symbol "AF"appears on the display. - The tuner will return to Alternative Frequencies whenever the reception Signals getting worse. - "ALARM "will be displayed when an emergency broadcasting is received; meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum. Using PTY to Select Program The PTY function allows you to search for stations with a particular Program Type. To select your program type, press the Softkey F1 (7): PTY music group PTY speech group PTY off Now you can select the music type or speech type using preset keys 1 - 6 for your selection as listed in below table: Preset number 1 2 3 4 5 6 PTY MUSIC group POP M, ROCK M EASY M, LIGHT M CLASSICS, OTHER M JAZZ, COUNTRY NATION M, OLDIES FOLK M 9 English Preset number 1 2 3 4 5 6 PTY SPEECH group NEWS, AFFAIRS, INFO SPORT, EDUCATE, DRAMA CULTURE, SCIENCE, VARIED WEATHER, FINANCE, CHILDREN SOCIAL, RELIGION, PHONE IN TRAVEL, LEISURE, DOCUMENT ADVANCED RDS SETTINGS Press the sound button (22) for 2 seconds, to enter the advanced RDS settings menu. a) TA SEEK or TA ALARM - TA SEEK mode: When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (30 sec. ) or RETUNE LONG (90 sec. ), the radio starts to retune to next same PI station. [. . . ] Avoid making fingerprint on the disc when handling it. Put the disc back in the box immediately after eject. This is to protect the disc from damage and dust. Do not expose the disc to heat and direct sunlight. [. . . ]