User manual VDO DAYTON CD 2604 MP3

[. . . ] CD 2604 MP3X User manual Mode d'emploi Bedienungsanleitung Gebruiksaanwijzing Istruzioni d'uso Instrucciones de manejo Modo de emprego Bruksanvisning Betjeningsvejledning Käyttöohje www. vdodayton. com pg3_class1. p65 1 6/12/02, 10:23 AM A 2 7 8 9 1 3 4 5 6 B 2 3 C D E SD/ MMC F 1 3 This page is a blank page. 4 INTRODUCTION BEFORE STARTING Thank you for purchasing this product which has been designed and manufactured according to applicable Safety Regulations, following the highest standards and subjected to rigorous testing. Please familiarise yourself with the device by reading carefully this instruction manual. Use the device as intended, then keep this manual handy in your car for future reference. INSTALLATION If your car is equipped with ISO connectors, simply insert them in the connectors of the car radio. If not, you can use an adaptor cable (Refer to the table on the separate installation card). [. . . ] will be deactivated when option 'RDS' is set to 'OFF'. CD/MP3 Player Loading CD in the CD player 1. Insert the CD (label upwards) into the slot. Listening to CD/MP3 If the CD is already inserted: 1. Use the ( / ) button to select CD source. You can set the CD options after selecting the CD source. Note 1: If first track is a data track, the disc will treat as MP3. (If no *. MP3 file was found throughout the disc, then it will treat as audio disc). If first track is an audio track, the disc will treat as audio disc. Note 2: If the `Disc Name' is programmed to the disc, each time this disc is reloaded in the systems (CD drive or CD Changer), the `Disc Name' stored in the memory will be displayed in the start up sequence. Note 3: If TA and NEWS are set to ON, announcements will interrupt CD playback. CD playback This CD player is suitable only for 12cm disc and can read both audio and MP3 format CD. MP3 playback You are able to listen to MP3 files that conform to MPEG1/2 & 2. 5-Layer 3 at bit rate up to 320kbps or Variable Bit Rate (VBR) burned ID3 tag on a CD-R or CD-RW disc in ISO9660 level 1 and 2 format are also supported. 18 Changing directory in MP3 1. Press ( / ) button to select desired directory. · Playback begins on the first file in the chosen directory. · When the end of directory is reached, the playing function continues with the first track of the next directory. The unit cannot read an MP3 file that has a file extension other than "MP3". The unit can play up to maximum 300 tracks and support maximum 50 directories per disc. The unit may not play the first track in the order that you wrote them to the disc 4. The unit plays only the first session if the disc contains both CD audio tracks and MP3 file. When playing a disc of 8k bps or variable bit rate (VBR), the elapsed playing time in the display window may not be correct. To display up to 30 characters for a song title, album title and artist's name, 32 characters for directory name, ID3TAG version 1. 1 is required. Characters other than uppercase/ lowercase letters ("Aa to Zz") and underscore ("_") may not be displayed. [. . . ] > the set is well connected (see Installation Card and INSTALLATION) The set does not function and the display screen does not light up. NO SOUND Verify: The display screen lights up but the set gives no sound (or only a whistle). > Increase the volume: if you are listening to the radio, move to an area where the station reception is better. > Check the antenna and its connection (see INSTALLATION). [. . . ]