User manual VENOM 4083 MINI TRAIN

[. . . ] 1) All model components must be connected correctly. Starting with the receiver, servos, and power supply. 2) The steering and throttle trims on the 4083 MINI TRAIN 2. 4 are set at neutral. 3) Always make sure to turn on the transmitter first before turning on the receiver. [. . . ] 4) Press EXIT to save and return to the FUNCTION menu. Press EXIT again to return to the main menu. 5 2. 7 FUNCTION / ABS (ANTI-LOCK BRAKE SYSTEM) The ABS feature is just like a real car in that the brakes will pulse intermittently when they are applied to reduce the chance of a skid or in the case of a 4 Wheel Drive vehicle, it will reduce under steer. The return amount, pulse cycle, and brake duty can be adjusted. The ABS effective region can be adjusted as a function of the steering mix. 1) Press ENTER to enter the FUNCTION menu 2) Use the +/- Keys to select the ABS function and press ENTER Press enter to select WC value. Range 0%~100% Press enter to select CY value. Range 0%~100% Press enter to select DL value. Range 0%~100% Press enter to select SM value. Range 0%~100% If this value is 0%, disable the Steering Mix . (See Section 2. 13) 8) Press enter to select DT value. Range 0%~100% 9) Press enter to select MODE. 4) Use the +/- Keys to change the value. 5) Press EXIT TWICE to save and return to the FUNCTION MENU, press EXIT again to return to the main screen. ST - STEERING SPEED 7 2. 9 FUNCTION / SPEED (CONTINUED) B. Throttle Speed 1) Use the +/- Keys to select the TH function. (See definitions below) 3) Use the +/- Keys to change the value. 4) Press EXIT TWICE to save and return to the FUNCTION menu. TH-THROTTLE SPEED Terms: SPD. FL ­ Speed Forward Delay. Range: 0%~100%, default: 0% 2. 10 FUNCTION / ATS (AUTOMATIC START) If full throttle is applied when starting on a slippery track, the wheels may spin and the car will not accelerate smoothly. When the ATS system is activated, moving the throttle trigger slowly will cause the throttle servo to switch from the set throttle position to a preset point so the tires do not lose their grip and the car accelerates smoothly. This feature is only effective for the first throttle trigger operation when starting. It has to be activated before every start. When the throttle trigger is released even slightly, the Start Function is automatically deactivated and returns to normal throttle trigger operation. 1) Press ENTER to see the FUNCTION MENU 2) Use the +/- Keys to select the ATS function and press ENTER 3) Press ENTER to select TRI item. [. . . ] This device generates and uses radio frequency energy and if not used properly may cause interference to radio and television reception. It has been tested and found to comply with the limits set by the FCC which are designed to provide reasonable protection against such interference. FCC Warning: CAUTION: VenomTM is not responsible for any radio or TV interference caused by unauthorized modifications to this product. Changes or modifications not authorized by VenomTM will void all warranties. [. . . ]