User manual VERCIEL PB 23

[. . . ] 4 Set Auto Tuning following screen instructions. ✎✎ If Input Source is not connected properly, programme registration may not work. ✎✎ Auto Tuning only finds programmes that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password. ❓❓Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. [. . . ] • Colour Gamut: Selects the range of colours that can be expressed. • Edge Enhancer: Shows clearer and distinctive yet natural edges of the video. • Expert Pattern: Patterns used for expert adjustment • Colour Filter: Filters a specific colour spectrum in RGB colours to fine-tune colour saturation and hue accurately. • Colour Temperature: Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Gamma method, etc. • Colour Management System: This is a system that experts use when they adjust colour with a test pattern. They can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without affecting other colours. For normal images, adjustments may not result in noticeable colour changes. ✎✎ Depending on input signal or other picture settings, the range of detailed items for adjustment may differ. ❐❐To reset picture settings SETTINGS ➾ PICTURE ➙ Picture Mode ➙ Picture Reset Resets picture settings that the user customizes. Select the picture mode you wish to reset. ❐❐To use Sound Mode SETTINGS ➾ AUDIO ➙ Sound Mode Adjusts TV audio to an optimal level according to a selected sound mode. ❐❐To manually adjust Sound Mode SETTINGS ➾ AUDIO ➙ Sound Mode ➙ Infinite Surround / Treble / Bass / Reset You can set minute options for each sound mode. First select a Sound Mode of your choice. • Infinite Surround: VERCIEL’s proprietary audio processing technology allows 5-channel-like surround sound from two speakers. Turns off the TV after a preset number of minutes. ❐❐To set current time SETTINGS ➾ TIME ➙ Clock Checks or changes the time while watching TV. • Auto : Synchronizes the TV clock to the digital time information sent by the TV station. • Manual : Sets the time and date manually if the auto setup does not correspond to the current time. ❐❐To set the TV to turn on and off automatically SETTINGS ➾ TIME ➙ On Time / Off Time Sets On / Off time. Select Off on Repeat to discontinue On Time / Off Time. ✎✎ To use On Time / Off Time, set the current time correctly. ✎✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time. ❐❐To set Automatic Standby SETTINGS ➾ TIME ➙ Automatic Standby [Depending on model] If you do not press any button on the TV or remote control for a certain period, the TV will automatically switch to standby mode. ✎✎ This function does not work on Store Demo mode or while software update. ❐❐To set password SETTINGS ➾ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set to 「0000」. When France is selected for Country, password is not 「0000」 but 「1234」. ❐ When France is selected for Country, password cannot be set to 「0000」. ❐❐To lock system SETTINGS ➾ LOCK ➙ Lock System Locks the selected channel or external input. First set Lock System to On. • Block Programme : Blocks programmes with content inappropriate for children. Programmes can be selected but the screen is blank and the audio is muted. To watch a locked programme, enter the password. • Parental Guidance : This function operates according to information from the broadcaster. [. . . ] • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor display. ꕢꕢ There is no sound after connecting the computer with the HDMI cable. • Check with manufacturer of your video card to ensure it supports HDMI voice output. (Video cards in DVI format require connection of a separate sound cable. ) ꕢꕢ When connected to the computer, the display is partially cut off or shifts to one side. • Set the resolution to support PC input. (If this does not work, reboot the computer. ) • Select Screen and adjust Position/Size/Phase. ❐❐Problems replaying movies in My Media ꕢꕢ I cannot view the files on the Movie List. • Check whether the file on the USB storage device can be read on a computer. • Check whether the file extension is supported. ꕢꕢ The file is invalid. [. . . ]