Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual VEXILAR PRO PACK. We hope that this VEXILAR PRO PACK user guide will be useful to you.
Lastmanuals help download the user guide VEXILAR PRO PACK.
Manual abstract: user guide VEXILAR PRO PACKGETTING STARTED
Detailed instructions for use are in the User's Guide.
[. . . ] You must connect it before you can use the Pro Pack. Simply push the connectors onto the proper terminals (red for positive and black for negative). The battery is charged so the Battery Status Indicator should read Full. [. . . ] Make sure that when you are done using your Pro Pack you recharge the battery and disconnect it before long storage periods. Remember to top it off every couple of months when you're not using it. Read the included owners manual for complete instructions on how to operate and interprete the flasher unit.
Transducer Support Arm
BATTERY CHARGING AND MONITORING
Your Vexilar Pro Pack system comes with a high quality sealed lead acid (gel cell) battery. In order to insure maximum running time for your flasher and maximum battery life, you need to follow some simple charging rules. The included charger is specifically designed for this battery. The charger is also protected internally from reverse hook up and short circuits. As long as you follow these instructions, you can expect many hours of use and many years of service from the battery.
To Charge the Battery
1. Plug the charger into a standard 110 VAC wall outlet. Make sure the charger's light is on. Connect the red charger clip to the positive battery terminal and the black clip to the negative terminal. The charger's light should turn off. This indicates that the battery is accepting a charge. Let the battery charge until the charger's light comes back on. Make sure you wait until it gets to full brightness. If you disconnect the charger from the battery and the light gets brighter, the battery is not fully charged. Charge times can range up to 48 hours for a completely dead battery. Do not leave the charger connected to the battery for more than 48 hours after the light has come on to full brightness. Tip - For faster charges with automatic shutoff, see your dealer about the optional V-300 Charger. [. . . ] Use the charger's indicator light as your primary "charge done" indicator. If you should ever use a different charger to charge this battery, use the Battery Status Indicator light as your "charge complete" indicator. It is important to note that percent of charge shown will vary with the temperature and battery load. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VEXILAR PRO PACK
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual VEXILAR PRO PACK will begin.
