User manual VIETA CTF90MC

[. . . ] For example, just touch the illuminated to play the next track or return to the previous track. E-1 1. NOTE OF DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. [. . . ] Bit Rates The unit supports bit rates from 32 - 320 kbps. E - 15 Files Playing Order When selected for play, Folder Search, File Search or Folder Select, files and folders are accessed in the order in which they were written by the PC writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. For example, a media with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select as shown below. An outline of a Media with MP3/WMA is shown below. Subfolders are shown as folders in the folder currently selected. ROOT 1 LEVEL 2 LEVEL 3 LEVEL 4 LEVEL noted£¡ not same as the 2000 01 001. MP3 002. MP3 003. MP3 004. MP3 02 005. MP3 "NOT DISPLAY" 006. MP3 007. MP3 X 03 008. WMA 009. WMA 010. WMA 04 011. MP3 012. MP3 06 07 016. MP3 017. MP3 05 013. MP3 014. MP3 "NOT DISPLAY" X 015. MP3 "NOT DISPLAY" The equipment assigns folder numbers. It is not possible to check folders that do not include MP3/WMA files. (These folders will be skipped without displaying the folder number and name) X 08 018. WMA 019. WMA 020. WMA 09 021. MP3 022. MP3 023. MP3 "NOT DISPLAY" X FILE/FOLDER PLAY There are three different play methods as following: File/Folder Intro play: Press M2 button more than 3 seconds during playing MP3/WMA disc for "intro play" all files of the current folder. Intro play should restart from the first song of the current folder, after all files in the current files have been intro-played. To disable current folder "intro play", long press M2 button more than 3 seconds Press M2 button less than 3 seconds is "intro play" all files on the disc. Intro play should restart at the very first file of the disc after all files in the disc has been intro played. To disable all files "intro play", press M2 button less than 3 seconds E - 16 File/Folder Repeat play : Press M3 button more than 3 seconds during playing MP3/WMA disc for "repeat play" all files of the current folder. The unit will display for a while then starts the files contained on the USB Stick. Once the unit read the USB Stick successfully, the first audio music file on the USB stick Playback will Automatically start. Press Mode button repeatedly to change to other modes or switch back to USB HOST. WARNING: Before remove the USB stick from the Front panel USB plug. Always remember to switch off the unit's power or switch to other mode then remove out the USB Stick. Never try removing the USB Stick while playing music file on the USB stick. It may damage the USB Stick and sometimes will caused the unit system lock up. The unit can support playback Music Player which have USB Interface. However due to the fast changing decoder technology and different kind of hardware interface. This unit may or may not be compatible to all the Music Player and USB Stick especially those USB Stick / Player which require to install a program driver. About Music Flash Player with USB Interface, Usually, the unit takes longer time to read this kind of player than normal USB Stick. Especially, if the Flash Player with built-in power battery sometimes takes 20-30 seconds to start up the playback The unit is not compatible to playing any Portable Hard disk. [. . . ] The PLAY command may differs depending on the Audio device. If the Audio device is not able auto start playing song after changed mode into "BT AUDIO" mode, user may need to operate the PLAY mode on the audio device to start the song playback. (2) Track up / down - by pressing the Track up / down buttons on this unit. (3) Pause / Play ­ by pressing the Pause / Play button on this unit. [. . . ]