User manual VIETA EV120 BROCHURE

[. . . ] To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). Do not use rental CDs with old labels that are beginning to peel off. [. . . ] (These folders will be skipped without displaying the folder number and name) X 08 018. WMA 019. WMA 020. WMA 09 021. MP3 022. MP3 023. MP3 "NOT DISPLAY" X FILE/FOLDER PLAY There are three different play methods as following: File/Folder Intro play: Press M2 button more than 3 seconds during playing MP3/WMA disc for "intro play" all files of the current folder. Intro play should restart from the first song of the current folder, after all files in the current files have been intro-played. To disable current folder "intro play", long press M2 button more than 3 seconds Press M2 button less than 3 seconds is "intro play" all files on the disc. Intro play should re-start at the very first file of the disc after all files in the disc has been intro played. To disable all files "intro play", press M2 button less than 3 seconds E - 15 File/Folder Repeat play : Press M3 button more than 3 seconds during playing MP3/WMA disc for "repeat play" all files of the current folder. And keep on repeat playing the current folder until "repeat play" is disabled. To disable current folder "repeat play", long press M3 button more than 3 seconds Press M3 button less than 3 seconds to "repeat play" the current file. And keep on repeat Playing the current file until the "repeat play" is disabled. To disable current file "repeat play", press M3 button less than 3 seconds File/Folder Random play: Press M4 button more than 3 seconds during playing MP3/WMA disc to "random play" all files of the current folder. To disable current folder "random play", long press M4 button more than 3 seconds Press M4 button less than 3 seconds is "random play" all files on the disc. To disable all file " random play", press M4 button less than 3 seconds. Excessive weight or size USB drive / device may cause permanent & serious damage to the unit. And may cause access to the buttons / knobs on the front panel impossible. P . 4 E - 17 13. SD OPERATIONS 1. Press panel open button to release the front panel. (P . 1) P . 3 3. The SD card slot is located on the unit as indicated in (P . 4). Insert the SD card into the card slot in the correct direction until a "CLICK" sound is heard. (P . 5) 5. Close the front panel. (P . 6) P . 4 P . 2 Face Up P . 5 P . 6 Click Open button P . 1 P . 3 Insert the SD Card with Label up side Push in till heard a "click" Close the front Panel 6. The display will show "SD PLAY" to indicate that the SD card is correctly inserted. Once the SD card is inserted, the MP3 file will automatically loaded & playback will also start. Does not matter the unit is in what mode (Tuner, CDC, CD, USB, etc), once a SD card is being inserted in the unit, unit will automatically switch to SD mode. All the SD files playback function is same as normal CD or MP3 disc playback. (Please refer to section CD operations & MP3 operations) TO STOP SD CARD PLAYBACK 1. Push on the end of the SD card to eject the sd card. Once the SD card is taken out, the unit will automatically switch to previous mode. (P . 8) . 7-P 2. User can use the mode button to choose SD mode (only if SD is inserted in the unit ) or any other modes, when they are in any mode. P . 7 Click P . 8 Push in till heard a "click" Remove the Memory Card WARNING 1. Please make sure to insert the SD card in the correct direction / orientation as indicated in picture (P Wrong insert will cause permanent & serious damage to the unit & the SD card. Always make sure the SD card is completely inserted before re-attaching the front panel. P . 9 Front side Back side E - 18 14. [. . . ] The PLAY command may differs depending on the Audio device. If the Audio device is not able auto start playing song after changed mode into "BT AUDIO" mode, user may need to operate the PLAY mode on the audio device to start the song playback. (2) Track up / down - by pressing the Track up / down buttons on this unit. (3) Pause / Play ­ by pressing the Pause / Play button on this unit. [. . . ]