User manual VIETA EV52 BROCHURE

[. . . ] This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Laser Product This product is equipped with low power laser equipment. For your own safety do not remove any covers or take the product apart. Repair work must be carried out by qualified personnel. CLASS 1 LASER PRODUCT Caution: This product is equipped with low power laser equipment inside, for your safety, don't open the laser radiation protective equipment. [. . . ] To confirm, press the Clock button (CLOCK). In standby mode, press the Clock button (CLOCK). At ECO-Power mode, press (CLOCK) or (DISPLAY) button on the remote control to display the clock. 9 NE-203i_Mouse remote_3 Nov 09. indd 9 2009-11-3 14:18:33 Sound Quality Adjusting the Volume To increase or decrease the volume, press the Volume Control button (VOL - / VOL +) on the top of unit or press the Volume Up/Down buttons (VOL +/-) on the remote control. Adjusting the super bass You can reinforce the bass sound to maintain rich, full bass at low volume. Press the Super Bass button (S-BASS) on the remote control to get the effect. Press the Super Bass button (S-BASS) again to cancel the effect. Controlling the Loudness This unit has loudness function, which can automatically increase the bass sound effect at low volume. It can also increase the bass sound effect at high volume, but it will be relatively less when it is at high volume. Press the Loudness button (LOUDNESS) on the remote control to obtain the loudness function. Presetting Equalizer You can adjust the sound reproduced simply by choosing from 5 preset equalizers. Press the Preset Equalizer button (P-EQ) repeatedly to scroll through the following options: POPS JAZZ CLASSIC ROCK FLAT Changing the Front Panel Darkness This unit has three brightness levels for you to adjust the clock display. Press the Dimmer Control button (DIM) on the remote control repeatedly to choose the desired brightness. Listening to Radio Broadcasts FM Radio You can listen to FM stations. Stations can be tuned in manually, automatically or from preset memory storage. Caution: Before listening to the radio, please check that the FM Antenna is correctly connected and adjusted for length and direction. Tuning in to a Station Auto Tuning 1. Press Source button on the unit or on the remote control. Insert a disc (with the printed side face to you) on the Disc Slot gently, the unit will read the disc and playback it automatically. Note: If in stop mode, please press the Play/Pause button (BF) to start playing the disc. Press the Play/Pause button (BF) to pause the playing, press the button again to continue play. Press the Stop button (L) to stop the disc playing. To Skip Search and Play Press the Previous button () once or more to skip previous one or more tracks of the disc. Press the Next button () once or more to skip forward one or more tracks of the disc. Text Display During Playback Press the Display button (DISPLAY) to show the current track number and remaining playback time. Program Play 1. Insert a disc and press the Stop button (L) on the remote control when it starts playing. Press the Program button (PROG), "01-P-00" appears. Press the / buttons on the remote control to select the desired track number. Press the Program button (PROG) to confirm the track number to be stored. Repeat steps 3-4 to select and store all desired tracks. Press the Play/Pause button (BF) to start programme play. [. . . ] Turning off the system also cancels the daily timer. 16 NE-203i_Mouse remote_3 Nov 09. indd 16 2009-11-3 14:18:41 Disc Handling Handling Precautions · Hold the disc by the edges so the surface will not be soiled with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. · Do not write on the label side with a ball-point pen or other writing implements. · Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. [. . . ]