User manual VIETA IP10

[. . . ] 1 Table of Contents Thank you for purchase this unit. Please read this owner's manual carefully before use and keep it at a safe place for your future reference. Table of Contents 1. Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Place the appropriate corresponding universal i-Pod adaptor, included with i-Pod, into this unit i-Pod docking location, then connect your i-Pod. A LED will indicate that the unit is on. Press the button repeatedly to select " " source. The i-Pod player stored music will be played automatically, press the (BF) button to temporarily stop the playing, press the button again, it will continue to play. Adjust volume using the volume control knob on the front of the unit or +/- buttons on the remote. Press the (H) button once or more to skip previous one or more tracks of the disc. Press and hold the (H) button to search for the position that you intend to start playing. Press the (G) button once or more to skip forward one or more tracks of the disc. Press and hold the (G) button to search for the position that you intend to start playing. Press the button on the remote in playing mode, all sound will be muted. Press the button again or +/- buttons on the remote or rotate the volume control knob on the front of unit to resume sound. Note: * * * In DC power on mode, directly dock your i-Pod player in the docking for charging. Select and play music through your i-Pod controls. For the purpose of saving power, recharging of your i-Pod is NOT SUPPORTED when the main set is in the STANDBY MODE. Listening to music from an USB or Memory card (SD or MMC): By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the unit, you can enjoy the device's stored music through the speakers of the unit. A LED will indicate that the unit is on. port on the rear of the unit or insert the 2. Insert the USB device's USB plug into the port on the rear of the unit. Press the button repeatedly to select " " or " " source. The i-Pod player stored music will be played automatically, press the (BF) button to temporarily stop the playing, press the button again, it will continue to play. Press and hold the (BF) button for 2 seconds or more to stop the playing. Adjust volume using the volume control knob on the front of the unit or +/- buttons on the remote. Press the (H) button once or more to skip previous one or more tracks of the disc. Press and hold the (H) button to search for the position that you intend to start playing. 8 Press the (G) button once or more to skip forward one or more tracks of the disc. [. . . ] Ensure that the correct source is selected. Reconnect the antenna securely Extend FM wire antenna to the best reception position Replace current battery with a new battery. Point the remote control toward the unit and make sure there is a clear pathway between the remote control lens and the unit. Make sure the dock adapter is the proper fit for your i-Pod. [. . . ]