User manual VIETA VPC47IP

[. . . ] INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. [. . . ] Especially, if the Flash Player with built-in power battery sometimes takes 20-30 seconds to start up the playback The unit is not compatible to playing any Portable Hard disk. Music File Playback Operation All the USB playback operation function is same as the operation on MP3/WMA. Please refer to 'MP3/WMA Operation' for more details. E - 20 13. MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD and MMC Memory Card . Please read below before you start the operation of Memory Card Inserting and Removing a SD or MMC card on the main unit 1 Face Up 2 3 Click Detach the Front Panel Insert the Memory Card with Label up side Inserting the SD or MMC card Push in till heard a "click" 1 2 Click 3 Detach the Front Panel Push in till heard a "click" Removing the SD or MMC card Remove the Memory Card Mode change to MEMORY CARD After a SD or MMC card was inserted into the main unit card slot. Press Mode button to select mode . The unit will display for a while then starts The files contained on the Memory Card. Once the unit read the MEMORY CARD successfully, the first audio music file on the Memory Card will automatically start playback. Press Mode button repeatedly is allowing changing to other modes or switch back to mode. If no any Memory Card is inserted into the main unit card slot. Press mode button will automatically skip mode. Music File Playback Operation All the SD or MMC Memory Card playback operation function is same as the operation on MP3/WMA. Please refer to 'MP3/WMA Operation' for more details. E - 21 14. MUSIC FILES TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit, user can easily transfer music files between USB Stick, SD or MMC Memory card. Please read below for the details operation of this function: TRANSFERABLE MEDIA Files are transferable within the following media: Removable USB Stick SD Memory Card MMC Memory Card MUSIC FORMAT SUPPORTED BY FILE TRANSFER ARE MP3 and WMA TRANSFER MP3 OR WMA MUSIC FILES This operation only can be performed during file playing a MP3 or WMA music file. 1. Playback a music file to be transferred and then long press the COPY / RECORD button to activate the Transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. Once selected the storage media, Press AUDIO button as confirmation to transfer the Playing file. If no further button is press within a 10 second time out, the unit will automatically resume to the previous mode 4. If the unit detected the selected media memory capacity is used up, Will be displayed on the LCD for a while then automatically resume to the previous mode. 5. After pressing AUDIO button to start the transfer, the playing music file will stop and the transferring will start at the same time. (The following step is an example of if selected USB) 6. When the transfer is processing, the LCD will displayed . 7. When the file transfer is completed, the LCD will display for a while and automatically playback the present music file which have been transferred. The transferred music file is automatically saved as a file into Folder "MY_MP3" or " MY_WMA" by the advance "File Management. " system of this unit. [. . . ] When mode change to BT AUDIO mode, some of the audio device may auto playback the music without operate the music playback operation and some of the device like mobile phone may need to first change into the 'Media Player' mode on the mobile phone otherwise the song cannot be direct playback via Bluetooth wireless. If the auto playback is not supported on the audio device then please refer to the instruction manual of the audio device on how to operate music playback via Bluetooth wireless technology. E - 38 Operating an audio device with this unit AVRCP ( Audio Video Remote Control Profile ) This unit can perform the following operations with the connecting Audio device which supports AVRCP (Audio Video Remote Control Profile) & only if the Audio device does support AVRCP. (1) Start playing - Every time when user change mode into "BT AUDIO" mode, this unit will automatically send a "PLAY" command via AVRCP to the audio device to command the auto start playing song in the audio device. The PLAY command may differ depending on the Audio device. [. . . ]