User manual VIEWSONIC CD4233

[. . . ] CD4233 LCD Commercial Display - User Guide - Guide de l'utilisateur - Guía del usuario - Bedienungsanleitung Model No. : VS13510 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration 0. 1% 0. 1% 0. 01% 0. 1% 0. 1% 0. 1% Substance Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6+) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Actual Concentration < 0. 1% < 0. 1% < 0. 01% < 0. 1% < 0. 1% < 0. 1% Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are: electronic ceramic parts (e. g. Lead in high temperature type solders (i. e. lead-based alloys containing 85% by weight or more lead). Lead as an allotting element in steel containing up to 0. 35% lead by weight, aluminium containing up to 0. 4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic i CD4233 Copyright Information Copyright ViewSonic Corporation, 2010. [. . . ] Press button to decrease reduction level. COLOR TEMPERATURE Is used to adjust the color temperature. The image becomes reddish as the color temperature decreases, and becomes bluish as the color temperature increases. ViewSonic 28 CD4233 LIGHT SENSOR Select "ON" to enable the ambient light sensor. The image brightness will be auto adjusted when ambient light changed. DYNAMIC CONTRAST Select "ON" to enable the dynamic conctrast mode. Can enhancement the image of high contrast ratio. PICTURE RESET Selecting Picture reset allows you to reset all OSD settings about PICTURE setting. Select "Yes" and press "ENTER" button to restore to factory preset data. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic 29 CD4233 Main-Menu SCREEN H POSITION Controls Horizontal Image position within the display area of the LCD. Press button to move screen to left. V POSITION Controls Vertical Image position within the display area of the LCD. Press button to move screen to DOWN. CLOCK Press Press * : INPUT VGA only button to expand the width of the image on the screen the right. button to narrow the width of the image on the screen the left. CLOCK PHASE * : INPUT VGA only Improves focus, clarity and image stability by increasing or decreasing this setting. ZOOM MODE You can select "FULL", "NORMAL" and "CUSTOM" and "REAL". (INPUT HDMI, DVI-D, VGA only) You can also select "FULL", "NORMAL" "DYNAMIC" and "CUSTOM" and "REAL". (INPUT COMPONENT, S-VIDEO, VIDEO only) Selecting "DYNAMIC" will make the screen display panoramic with the expansion of the middle and outside of the screen changed. (The upper and the bottom of the image will be cut by expansion. ) Dynamic image is the same as FULL size image when HDTV signal is input. Selecting "REAL" image will be displayed 1 by 1 pixel. ViewSonic 30 CD4233 SCREEN RESET Selecting Screen reset allows you to reset all OSD settings from PICTURE setting. Select "Yes" and press "ENTER" button to restore the factory preset data. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic 31 CD4233 Main-Menu AUDIO BALANCE Adjusts the balance of L/R volume. Press button to move the stereo sound image to right. Press button to move the stereo sound image to left. TREBLE This feature helps you to accentuate or reduce the high frequency sound. Press button to decrease TREBLE sound. BASS This feature helps you to accentuate or reduce the low frequency sound. Press button to decrease BASS sound. SPEAKER This feature helps you to cut the internal or the external loudspeaker. Press or button to exchanges the internal and the external loudspeaker. AUDIO RESET Selecting Audio reset allows you to reset all OSD settings from AUDIO setting. Select "YES" and press "ENTER" button to restore the factory preset. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic 32 CD4233 Main-Menu PIP (PICTURE IN PICTURE) Note: The "PIP" and "POP" modes do not function when the screen size is "CUSTOM" or "REAL". PIP SIZE Selecting the size of picture inserted at the "Picture-in-Picture" (PIP) mode. [. . . ] Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of with business relationships, or other commercial loss, even if advised of the possibility of such damages. Any other damages, whether incidental, consequential or otherwise. [. . . ]