User manual VIEWSONIC PJ260D

[. . . ] ViewSonic PJ260D DLP Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic. com in English, or in specific languages using the Regional selection box in the upper right corner of our website. "Antes de operar su equipo lea cuidadosamente las instrucciones en este manual" - () Model No. : VS11935 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. [. . . ] Tracking Adjust the phase of the projector relative to the computer. H Position (Horizontal Position) Adjust the image left or right within the projection area. V Position (Vertical Position) Adjust the image up or down within the projection area. Video Image (Video Mode) Color Adjust the intensity of colors. Tint Shift colors toward red or green. Sound (Computer / Video Mode) Volume Adjust the volume level. Mute Cut off the sound temporarily. Setting (Computer / Video Mode) Menu Position Choose the menu location on the display screen. Projection Adjust the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Invert or reverse the image accordingly. Signal Type Specify the signal source that you wish to project. YCbCr: For S-Video cable. ViewSonic 16 PJ260D Lamp Counter Display the lamp's elapsed operating time (in hours). Lamp Counter Reset Reset the lamp counter to 0 hours. Power Saving If no operation is performed for a specific period of time, the power to the projector is automatically turned off. Auto Source Automatically scan the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. High Altitude Turning on High Altitude mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. OSD Timeout Duration OSD menu stays active (at idle state by second). Option (Computer / Video Mode) Blank Screen Blank the screen temporarily, and select the screen color when this function is active. Start-up Screen Select start-up screen when the projector is powered on or when no signal is input. "User" is the screen that you captured. Screen Capture Capture the current projection screen as a start-up screen. When the password function is added, image projection requires an entry of the preset password at power-on. Language (Computer / Video Mode) Select the language used by the on-screen menu. Factory Default (Computer / Video Mode) Restore all menu settings to factory default settings. ViewSonic 17 PJ260D Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. [. . . ] Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. [. . . ]