User manual VIEWSONIC PJ759

[. . . ] ViewSonic PJ758/PJ759/PJ760 LCD Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () - () - Model No. : VS11862/VS11861/VS11822 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Using the / buttons switches the noise reduction mode. HIGH MID LOW · This function performs only for a video, s-video or component video of 525i(480i) or 625i(576i) signal. · When this function is excessive, it may cause a certain degradation of the picture. Using the / buttons switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 PROGRESSIVE VIDEO NR COLOR SPACE · This item can be selected only for a computer signal or component video signal except SCART RGB signal. · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO. Using the / buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port. COMPONENT SCART RGB When the SCART RGB is selected, COMPONENT (Y, Cb/Pb, Cr/ Pr) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. COMPONENT (continued on next page) ViewSonic 31 PJ758/PJ759/PJ760 INPUT Menu INPUT Menu (continued) Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the / buttons to select the input port. (2) Using the / buttons switches the mode for video format. AUTO NTSC PAL SECAM N-PAL M-PAL NTSC4. 43 · This item is performed only for a video signal from VIDEO port or S-VIDEO port. · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well for some signals. an irregular picture, lack of color), please select the mode according to the input signal. Using the / buttons turns the frame lock function on/off. TURN ON TURN OFF · This item can be performed only on a computer signal with a vertical frequency of 50 to 60 Hz. · When the TURN ON is selected, a moving pictures are displayed more smoothly. · This function may cause a certain degradation of the picture. [. . . ] Any product on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. Repair or attempted repair by anyone not authorized by ViewSonic. [. . . ]