User manual VIEWSONIC PJD2121

[. . . ] ViewSonic SVGA DLP Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - - () - () PJD2121 Model No. : VS12617 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Use the direction arrow keys for navigating the picture. Press MENU until the DISPLAY menu is highlighted and press Enter. Press to highlight Magnify and press to select a desired value. Pan and Scan When you zoom in the detail on the projected picture, you may use Pan and Scan to see the details. Press MENU until the DISPLAY menu is highlighted. Press to highlight Pan and Scan and press Enter. to select a desired value. Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. Press MENU on the remote control or projector repeatedly until your desired mode is selected. Go to the PICTURE > Image menu, press ENTER and to select a desired mode. 13 ViewSonic PJD2121 Picture modes for different types of signals The picture modes available for different types of signals are listed below. 1 2 3 VGA (Default): Maximizes the brightness of the projected image. ViewMatch mode: Switch in between high brightness performance or Accuracy color performance. Video: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. 4 User: Allows user to adjust perfer picture modes. See "Setting the User mode" on the following for details. Setting the User mode There is one user-definable mode if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User) as a starting point and customize the settings 1. Press MENU to open the On-Screen Display (OSD) menu Go to the PICTURE > Image menu and press Enter. to select a sub-menu item to be changed and adjust the value with . This function is only available when User mode is selected up in the Picture Mode sub-menu item. Fine-tuning the image quality in user modes Adjusting color 1. Press to select color you want to adjust. Press to select a sub-menu item to be changed and adjust the value with Please be noticed this is one of the colors. Hiding the image In order to draw the audience's full attention to the presenter, you can use BLANK on the remote control to hide the screen. Press again to restore. 14 ViewSonic PJD2121 Shutting down the projector Press POWER and a confirmation message displays prompting you. If you don't respond in a few seconds, the message will disappear. The POWER indicator light flashes RED, the projection lamp shuts down, and the fans will continue to run for approximately 60 seconds to cool down the projector. [. . . ] Take or ship the product in the original container packaging to an authorized ViewSonic service center. Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. [. . . ]