User manual VIEWSONIC PJD5555LW

[. . . ] PJD5151/PJD5153/PJD5155/ PJD5250/PJD5253/PJD5255/ PJD5555w_Tiger DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www. Com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual” Model No. [. . . ] Press to correct keystoning at the bottom of the image. press / Press • Using the OSD menu 1. Open the OSD menu and go to the DISPLAY > Keystone menu. Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image. / Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. Using the remote control Press on the remote control to display the Zoom bar. press repeatedly to magnify the picture to a desired size. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press repeatedly until it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. Open the OSD menu and go to the DISPLAY > Zoom menu. Repeat steps 2-4 in the section of Using the remote control above. This function is only available when a PC input signal is selected. 26 The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details. To change the projected image ratio (no matter what aspect the source is): 1. Open the OSD menu and go to the DISPLAY > Aspect Ratio menu. Press / to select an aspect ratio to suit the format of the video signal and your display requirements. About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. [. . . ] How long the warranty is effective: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase. All accessory lamps purchased separately are warranted for 90 days. Who the warranty protects: This warranty is valid only for the first consumer purchaser. Any product on which the serial number has been defaced, modified or removed. [. . . ]